I have a complete minus silencers K2 for sale. All original switches electrics present (looks like E/S there too) and instruments
In my view based on nearly 50 years of Morini ownership the best 350 engine. Nicasil bores only on this variant give a freedom of running that is a joy.
Its a restoration project with NOVA and the official DVLA approved dating Certificate and I can advise on getting registered with DVLA as I am the clubs registrar and dating officer.
Engine turns over fine, F brake looks to have no fluid and R brake seized in the cylinder or pedal. Wheels just fine-Infact excellent , gears select ok. Buyer collects near Rugby but might deliver for ££
I'M SELLING SILLY CHEAP ! so this is a VIABLE restore project. Send me personal message if interested. If you wanted to break I think the return would be fantastic, sacrilege for sure, but I do not have the time or the inclination .
K2 for restoration
-
Arthur Farrow
- Posts: 158
- Joined: 24 May 2008 09:09
- Location: Stretton on Dunsmore, Warwickshire
K2 for restoration
- Attachments
-
- side view low.jpg (493 KiB) Viewed 441 times
-
- fork low.jpg (451.99 KiB) Viewed 469 times
-
- Front low.jpg (466.67 KiB) Viewed 469 times
Last edited by Arthur Farrow on 16 Feb 2026 13:45, edited 1 time in total.
God save the King (& my pistons)
ARTHUR
ARTHUR
-
Arthur Farrow
- Posts: 158
- Joined: 24 May 2008 09:09
- Location: Stretton on Dunsmore, Warwickshire
Re: K2 for restoration
Just to be clear this is a LEFT FOOT gearchange as the later models were BUT conversation back to normal Morini Right gear change would not be beyond the wit of man!
God save the King (& my pistons)
ARTHUR
ARTHUR
Re: K2 for restoration
I remember the K2 Classic I had for a while.
Sorely tempted as a source of an engine,while Benji re-rebuilds my spare 350 lump.
Hmm, "Turns over". Plus I didn't really gel with the cam in my K2. Perhaps it was just mine, but it was a bit too linear for me. Made a good touring machine though.
A good sum of the parts is greater than the whole project for somebody, for sure.
Sorely tempted as a source of an engine,while Benji re-rebuilds my spare 350 lump.
Hmm, "Turns over". Plus I didn't really gel with the cam in my K2. Perhaps it was just mine, but it was a bit too linear for me. Made a good touring machine though.
A good sum of the parts is greater than the whole project for somebody, for sure.
Morini: 1980 2c/375 The Old Gal plus all that remains of the Forgotten Error (the engine)
Gilera: 1957 175 Sport
Honda: 1984 CB250RS
Husqvarna: 2019 401 Svartpilen
Wishlist: 2026 Morini 350
Gilera: 1957 175 Sport
Honda: 1984 CB250RS
Husqvarna: 2019 401 Svartpilen
Wishlist: 2026 Morini 350
-
Arthur Farrow
- Posts: 158
- Joined: 24 May 2008 09:09
- Location: Stretton on Dunsmore, Warwickshire
Re: K2 for restoration
Is that Pete F ???
going to chat with a fellow at Bristol show about it . Thought I had sold then the chap expressed grief about LH gear change...oh well all to their own
Contact me off forum if you wish or via the Clubs spotty bummed Chairman Tom
going to chat with a fellow at Bristol show about it . Thought I had sold then the chap expressed grief about LH gear change...oh well all to their own
Contact me off forum if you wish or via the Clubs spotty bummed Chairman Tom
God save the King (& my pistons)
ARTHUR
ARTHUR
-
Arthur Farrow
- Posts: 158
- Joined: 24 May 2008 09:09
- Location: Stretton on Dunsmore, Warwickshire
Re: K2 for restoration
Oh the cam...well my own K2 I use is a delight. Pulls well and screams. Makes me giggle
God save the King (& my pistons)
ARTHUR
ARTHUR