Ignition Trigger / Crank Position Sensor
Ignition Trigger / Crank Position Sensor
Hi All,
The 1200 is a bit new to me, so I'm looking for where to find the crank position sensor and ignition triggers, can't find them on my wiring diagram. Am I missing something?
The 1200 is a bit new to me, so I'm looking for where to find the crank position sensor and ignition triggers, can't find them on my wiring diagram. Am I missing something?
-
morini_tom
- Posts: 1081
- Joined: 05 May 2006 13:47
- Location: Northampton
Re: Ignition Trigger / Crank Position Sensor
Item 17
- Attachments
-
- IMG_3143.jpeg (491.03 KiB) Viewed 431 times
Re: Ignition Trigger / Crank Position Sensor
Thanks Tom,
So that one does both functions, crank position as well as speed?
I am (slowly) learning the detail 1200 motor.
So that one does both functions, crank position as well as speed?
I am (slowly) learning the detail 1200 motor.
-
morini_tom
- Posts: 1081
- Joined: 05 May 2006 13:47
- Location: Northampton
Re: Ignition Trigger / Crank Position Sensor
Yes, one of the cam gears has a trigger wheel on it so it gets speed from the trigger wheel teeth and there is a missing tooth which defines the rotational position.
The ECU then knows cam position and will double the speed for crank speed and calculate injection and ignition timing etc accordingly.
Not so different to the pickup on an aircooled Morini’s cam in that sense.
You can see the trigger wheel in this photo from the manual, with the missing tooth at (1)
The ECU then knows cam position and will double the speed for crank speed and calculate injection and ignition timing etc accordingly.
Not so different to the pickup on an aircooled Morini’s cam in that sense.
You can see the trigger wheel in this photo from the manual, with the missing tooth at (1)
- Attachments
-
- IMG_3151.jpeg (62.2 KiB) Viewed 319 times
Re: Ignition Trigger / Crank Position Sensor
The - so called - phonic wheel (D) e,g. the attached sensor does generate rpm values and ignition timing, the speedo sensor is located at the swing arm.So that one does both functions, crank position as well as speed?
The rpm value is then sent from the ECU to the dashboard via CAN bus.
Furthermore the gear position is calculated by taking the rpm and speed infos.
regards
Ebi
Re: Ignition Trigger / Crank Position Sensor
Thanks Guys,
Very good explanations, much appreciated.
The cams are chain driven from an intermediate shaft, I can see, but what drives the intermediate shafts from the crankshaft? Is it gears?
Very good explanations, much appreciated.
The cams are chain driven from an intermediate shaft, I can see, but what drives the intermediate shafts from the crankshaft? Is it gears?
Re: Ignition Trigger / Crank Position Sensor
I have downloaded the Corsaro ZZ manual from the members area. Some places I have trouble understanding what part of the engine is shown, in some of the little black and white photos, there is sometimes no context. And sometimes not a photo of the thing I'm looking for
Thanks for the photo you posted it had the clutch and starter motor in it so I know exactly where I'm looking. From a manual or your own photo?
Thanks for the photo you posted it had the clutch and starter motor in it so I know exactly where I'm looking. From a manual or your own photo?
Re: Ignition Trigger / Crank Position Sensor
Thats my own photo, but you can download the manual for the older corsaros over here from the dropbox:
viewtopic.php?t=3840
viewtopic.php?t=3840