Excalibur part wanted! (or New York).

Post Reply
Richard_Carrigan
Posts: 32
Joined: 01 Sep 2008 21:24
Location: London, England

Excalibur part wanted! (or New York).

Post by Richard_Carrigan »

A 'wanted' ad for Excalibur bits seems to be a rare thing, but I'm after the silencers. The right-hand one fell off my 507 New York & vanished from the face of the earth so I need a replacement. As it was a cheap & nasty looking aftermarket thing I imagine it'll be easier to track down a pair of originals. I'm also assuming that the Excalibur and New York used the same items: in photographs they certainly look identical.

Thanks in advance
Richard (Dartford, Kent, UK)
julianharty
Posts: 590
Joined: 15 May 2016 16:34
Location: High Wycombe
Location: High Wycombe Area (Bucks)

Re: Excalibur part wanted! (or New York).

Post by julianharty »

A reply to this very old question as there is at least one source of these silencers - mdinaitalia currently has 8 NOS pairs available https://www.mdinaitalia.co.uk/M350142SITO.html I bought a set from NLM about a decade ago and these AFAIK are the remaining stock. And yes I believe the silencers are identical on Excaliburs and New Yorks.
ianlucas006
Posts: 71
Joined: 04 Jan 2021 10:29
Location: Tiverton Devon

Re: Excalibur part wanted! (or New York).

Post by ianlucas006 »

Yes correct. I was talking to Doug about something else recently and he was bemoaning the fact that he had loads made and as only ever sold one! Someone needs to cheer him up and buy some. I suspect he might be up for a deal!
Post Reply