Hi Tom, I'd like a couple of those 350/500 starter wedge/cam thingies please. I'll see if can add a few other bits to make it worth the postage etc.
edit-I'm talking about the 15-06-75 bits!
All donations to the rest home for old Camels, Leicestershire.
I could use the 300144 parts (250T engine mounting rubbers) but may not be worth it on their own - how much for 4 (if you have that many)?
Do you know what 370129 is please? The only reference I could find was an old NLM number which is described as a petrol cap but that does not look much like one? I am pretty sure it is not a standard 250T part.
Only have two of those 250T engine mounting rubbers...
Those are cups, i believe they have something to do with the mounting of the tank/ rubber of the square frame enduro's, both kanguro and camel.
Could be that they put them in another bag with different factory number, it was a bit of a mess really, everything scattered around in boxes, took me a lot of hours to find out what every is.
Still i don't know what some of the parts are, like the zink plated brackets with number: 15 06 26 ?
And the springs: 22 01 19 ?
I have a big list from former German dealer Schwarz, with most if not all the partnumber Morini used for all their models, but with those numbers the list only says: Feder, Schlauch, Dichtring
I have a KJ125 project and might be interested in parts 14 04 29 (swing arm spindle) and the clutch basket. And any other parts you think are compatible...
How much do you want for them and postage to Derby, England?
Yes as far as i know the spindle is for 125H and 250T and V, but i am not certain about the KJ since this is enduro style frame, in comparison the spindle for 350cc Sport/ Strada and Kanguro are different because of the frame.
Maybe somebody here knows excactly?
The clutch centre is definitely a 125H/KJ and 250T item, and maybe also 250V? They all used the same wet clutch set up?
I would certainly buy all 5 clutch springs if they really do fit the 250T but the parts manual has them as 20.01.41 (not 34), and the Blue book has them as 1mm shorter than the 125. Could you possibly measure the length and post it?
I have a KJ125 project and might be interested in parts 14 04 29 (swing arm spindle) and the clutch basket. And any other parts you think are compatible...
How much do you want for them and postage to Derby, England?
Cheers,
Norton
As Chairman Tom says, you are perfectly placed to join in our green lane rides! Will you be doing some trail riding?
All donations to the rest home for old Camels, Leicestershire.
The main frame of the KJ is the same as other models, one of the great morini ideas of interchangeable parts/design. So I imagine that while the swingarm is different the spindle could be the same? If possible could you get some dimensions please Tom. Currently the swing arm is held in place by a length of threaded bar that a previous owner used, this is seized solid.