can anyone tell me how to adjust up-down the low beam and high beam lenses on the Corsaro?
I have looked and cant see any obvious sdjustment screws.
Cheers Nigel.
Head Light adjustment -how?
-
morini_tom
- Posts: 1078
- Joined: 05 May 2006 13:47
- Location: Northampton
loosen the lower of the two screws on each headlamp/flyscreen side. The headlamp can then be adjusted using the screw in the middle of the square moulding which sits above and between the two headlamps. Once done re-tighten the two screws on the side.
Difficult to explain but you'll see what i mean when you start fiddling...
Difficult to explain but you'll see what i mean when you start fiddling...
-
corsaro chris
- Posts: 1180
- Joined: 13 Jul 2006 21:28
- Location: Berks, UK
Read the manual - advice we all ignore!
The headlamp is pretty simple to adjust as Tom says. I did mine in minutes, but since then the adjusting screw has worked itself loose
Headlamp beams are pretty good as well...
The book has lots of settings for the clocks - to access the menu you might need to do things slightly different - on mine you have to keep the reset button pressed as soon as you switch on the ignition - then you can cahnge the clock and other settings as detailed.
All good fun, but not as good as riding the bike
So - good riding,
CC
The headlamp is pretty simple to adjust as Tom says. I did mine in minutes, but since then the adjusting screw has worked itself loose
Headlamp beams are pretty good as well...The book has lots of settings for the clocks - to access the menu you might need to do things slightly different - on mine you have to keep the reset button pressed as soon as you switch on the ignition - then you can cahnge the clock and other settings as detailed.
All good fun, but not as good as riding the bike
So - good riding,
CC
"I'll use the Morini"