[/quote]Glad yours is being sorted George, can I ask if that price is per individual coil?[/quote]
Yes that is correct.
Plus VAT.
3 1/2 stator wanted
Re: 3 1/2 stator wanted
Singer 185K
Wheel Horse commando 7
Honda SS90 1965
Wheel Horse commando 7
Honda SS90 1965
Re: 3 1/2 stator wanted
My Stator is back and has had the ignition coil repaired/rewound also to the other coils and the cable replaced.
- Attachments
-
- stator.jpeg (284.98 KiB) Viewed 5746 times
Singer 185K
Wheel Horse commando 7
Honda SS90 1965
Wheel Horse commando 7
Honda SS90 1965
Re: 3 1/2 stator wanted
Hi
thanks for finding a route to repair the stators let's us know how it goes.
I have a 500 stator that's only measuring 185 ohms
Please could you measure the resistance of your generator winding as it is now for reference and do you know the gauge and type of wire used. I think the club could invest in some emergency loan type spares as in your situation it would be a shame to miss out on a trip for want of a spare . 20 years ago of course one could buy a new one and have it sent out as happened to Pete Mumford whose Kanguru expired in France. Now there are no new ones only dubious old ones...
Thanks
Mark
thanks for finding a route to repair the stators let's us know how it goes.
I have a 500 stator that's only measuring 185 ohms
Please could you measure the resistance of your generator winding as it is now for reference and do you know the gauge and type of wire used. I think the club could invest in some emergency loan type spares as in your situation it would be a shame to miss out on a trip for want of a spare . 20 years ago of course one could buy a new one and have it sent out as happened to Pete Mumford whose Kanguru expired in France. Now there are no new ones only dubious old ones...
Thanks
Mark
Re: 3 1/2 stator wanted
I'll start off with this, having been told I don't know what I'm talking about in the past.
https://photos.app.goo.gl/u3E3vAG2CTJ1zRvs9
https://photos.app.goo.gl/u3E3vAG2CTJ1zRvs9
Paul Compton
http://www.morini-mania.co.uk
http://www.youtube.com/user/EVguru
http://www.morini-mania.co.uk
http://www.youtube.com/user/EVguru
Re: 3 1/2 stator wanted
Paul, I'll see your photo and raise http://www.motomoriniclub.nl/rewindignitioncoil.html
I'ts not difficult, may even work with an Indian 'Vespa' coil, though thats more turns of finer wire (I think). Could be worth a try, though.
I'ts not difficult, may even work with an Indian 'Vespa' coil, though thats more turns of finer wire (I think). Could be worth a try, though.
Re: 3 1/2 stator wanted
I live in the falorne hope that anyone who's thinking of rewinding their ignition coil might have found that link themselves.Ming wrote:Paul, I'll see your photo and raise http://www.motomoriniclub.nl/rewindignitioncoil.html
I also live in the hope that people would occasionally use the search function on this forum and search engines in general.
Paul Compton
http://www.morini-mania.co.uk
http://www.youtube.com/user/EVguru
http://www.morini-mania.co.uk
http://www.youtube.com/user/EVguru
Re: 3 1/2 stator wanted
Chaps,
I know what the wire diameter and class should be I wanted to confirm from chips1953 that Rex's Speed shop had used the gauge suitable for the somewhat voltage limited Morini transducer. I am am well aware of the most useful Dutch site and indeed my circuit diagram of the 18A regulator is on that site. Anyway I shall not ask any more questions without doing a proper search. thanks
Mark
I know what the wire diameter and class should be I wanted to confirm from chips1953 that Rex's Speed shop had used the gauge suitable for the somewhat voltage limited Morini transducer. I am am well aware of the most useful Dutch site and indeed my circuit diagram of the 18A regulator is on that site. Anyway I shall not ask any more questions without doing a proper search. thanks
Mark
-
- Posts: 1416
- Joined: 12 Nov 2007 23:44
- Location: Leicestershire
Re: 3 1/2 stator wanted
I don't think George looks in here all that often so I'll tell you what he told me in a PM. His new ignition coil reads 278 ohms and is fitted and all works nicely.mbmm350s wrote:Chaps,
I know what the wire diameter and class should be I wanted to confirm from chips1953 that Rex's Speed shop had used the gauge suitable for the somewhat voltage limited Morini transducer. I am am well aware of the most useful Dutch site and indeed my circuit diagram of the 18A regulator is on that site. Anyway I shall not ask any more questions without doing a proper search. thanks
Mark
All donations to the rest home for old Camels, Leicestershire.