Page 1 of 1
350 bits
Posted: 30 Oct 2018 16:22
by MickeyMoto
Hello,
I am looking for the following, please, for winter restoration purposes. Salt on roads, so fettling time.
A later 350 tank (K series). I have one, maybe two, spare early tanks for exchange or sale.
Also a pair of chain adjusters.
Anybody got a fairing? The squarish original one?
A 500 choke lever.
Silencer brackets.
Thanks,
Mike.
Re: 350 bits
Posted: 30 Oct 2018 23:45
by hombre
Re: 350 bits
Posted: 31 Oct 2018 08:16
by hendre
check the fairing I have for sale:
http://morini-riders-club.com/forum/vie ... f=5&t=5246
Also got a K2 tank looks very nice except water dripped off on one side for years and went into the bottom trim. now there is a rusted spot that needs repair. If you can salvage the tank cap for me (I don't have a key but maybe you know how to get one) the tank is for free. I'll try and make pictures tonight
choke lever from a K2 is identical to a 500?
Re: 350 bits
Posted: 31 Oct 2018 16:44
by hendre
tank pics
Re: 350 bits
Posted: 31 Oct 2018 16:46
by hendre
detail
Re: 350 bits
Posted: 31 Oct 2018 19:34
by 3potjohn
Blimey I had a K1 fairing with an oblong hole for the headlamp sitting around for about 11 years and only sold it a month or so ago.
Best of luck. John
Re: 350 bits
Posted: 31 Oct 2018 23:41
by Steve Brown
Choke lever, do you mean the handle bar, cable type? I have one of those.
Re: 350 bits
Posted: 01 Nov 2018 06:41
by hendre
hendre wrote:check the fairing I have for sale:
http://morini-riders-club.com/forum/vie ... f=5&t=5246
Also got a K2 tank looks very nice except water dripped off on one side for years and went into the bottom trim. now there is a rusted spot that needs repair. If you can salvage the tank cap for me (I don't have a key but maybe you know how to get one) the tank is for free. I'll try and make pictures tonight
choke lever from a K2 is identical to a 500?
that went fast all of a sudden, fairing has been sold to someone interested earlier
Re: 350 bits
Posted: 01 Nov 2018 22:40
by MickeyMoto
Steve Brown wrote:Choke lever, do you mean the handle bar, cable type? I have one of those.
Exactly that! I'll pm you.
Thank you.
Re: 350 bits
Posted: 01 Nov 2018 22:45
by MickeyMoto
Thank you for the offers of fairings and a tank.
I may be sorted for a fairing now. I was a bit dubious about shipping costs from NL.
I have the chain adjusters and the silencer brackets, too.
I am really looking for a K tank, which is different to the K2 and has the bolt hole at the rear. I have looked at some today, but may wait until the bike is on its way, restoration wise.
Mike.
Re: 350 bits
Posted: 02 Nov 2018 11:13
by Steve Brown
MickeyMoto wrote:
I may be sorted for a fairing now. I was a bit dubious about shipping costs from NL.
.
I wouldn't worry about that, I've bought a few bits from the low countries and the cost has always been very reasonable. I think it's the UK couriers that dress like Dick Turpin sometimes. Oh and the American ones too. Must still be a lot of stagecoach hold ups over there?
I'll put a choke lever aside for you, I should have everything apart from the cables. The choke piston rubbers will be a bit dubious though...
Re: 350 bits
Posted: 02 Nov 2018 15:07
by Haboola72
Re: 350 bits
Posted: 02 Nov 2018 22:35
by MickeyMoto
Thank you. That is a K2 tank by the way. Shame as it looks in good condition and the price is good.