Page 1 of 1
Excalibur / Coguaro engine mount bracket
Posted: 13 Oct 2013 17:33
by MickeyMoto
Anybody have an engine mounting bracket for Cougaro / Excalibur, please? For the later Japanese electric engines. I need to modify for the fit to the Kanguro.
Thanks,
Mike.
Re: Excalibur / Coguaro engine mount bracket
Posted: 13 Oct 2013 20:48
by 'It must be a .....'
Hi, the Cougaro has a different frame from the mono shock Camel and Kanguro (square tubes) which have the same slotted road bike front plates (kinked frame) so I don't think there will be room for the later starter, hopefully I'm wrong.
Re: Excalibur / Coguaro engine mount bracket
Posted: 14 Oct 2013 09:06
by MickeyMoto
Hi,
I've measured up the frames and they are very similar at the front. The difference is in the mountings on the frame and engine. The 501 has a different mounting system to fit the starter motor which is why I would like an old bracket to modify to fit the Kanguro frame to the 501 engine. The main difference I can see is in the lower front which has been repositioned.
When I get the engine in and mounted at the back I will then be able to see what needs doing.
regards,
Mike.