Page 1 of 1
WANTED 250 2C Instrument Housing
Posted: 13 Sep 2010 19:08
by 72degrees
I'm rebuilding the infamous 2C/375, but the plastic housing for the clocks, ignition switch and idiot lights is badly cracked and held together with gaffer tape. A long shot, but has anyone got one going spare?
Re: WANTED 250 2C Instrument Housing
Posted: 14 Sep 2010 09:41
by EVguru
Kanguru ones (certainly on the X model) are the same.
Re: WANTED 250 2C Instrument Housing
Posted: 19 Nov 2010 09:07
by andyroach
If you send me a photo of it I might have one.
Cheers
Andy
Re: WANTED 250 2C Instrument Housing
Posted: 19 Nov 2010 18:38
by 72degrees
andyroach wrote:If you send me a photo of it I might have one.
Cheers
Andy
It's OK. I got inventive with Holts Bumper Repair and a bit of old MX body plastic as backing and repaired mine. Not exactly concours quality, but it works.