Stator rewind or rebuilt stator needed

[Canuck750]

I need a stator rewound for my 1979 500W or a complete rewound stator.
I had taken my old stator to a fellow in Canada who advertised stator rewinding only to have him completely strip it down and then go out of business.
I have converted the bike to Elextronik Sasche ignition, I do not need the ignition coil jut the five charging coils. I am currently running another stator that had been 'looked' at by another shop but it is not charging, I think they may have not soldered the coils back together correctly??

This is what I have to work with, not much to go with


One tab broken on the stator body, its not great.


Can anyone offer a rewinding service or offer a replacement stator or send me to a shop that can sort this out for me???

Many thanks

Jim Carey in Canada

[simonnorthroad]

West country Windings in the UK seem to be the main place . Its where North Leicester MCs got all theirs done. I had one done recently £95 and VERY quick

[Canuck750]

West country Windings in the UK seem to be the main place . Its where North Leicester MCs got all theirs done. I had one done recently £95 and VERY quick

Thank You!!

I will get in touch with West Country Windings

Jim Carey

[simonnorthroad]

They understand about the correct no. of windings and necessary 200+ ohm resistance on the green wire, not that you need it!

[Canuck750]

I traded email with Westcountry Windings and they assured me they can rewind both of my stators, parts are in the mail today!
Thank you for the contact, I will finally have a reliable charging system in my 500W or the spring.
I can't wait to enjoy riding the bike this summer and hopefully getting my 1975 - 3 1/2 Strada on the road this summer as well.

[mbmm350s]

Great to know WestCountry windings are doing this work.

To assist anyone finding these posts in the future I can also recommend.
Rex's Speed Shop:
www.rexs-speedshop.com

based near Tonbridge East Sussex UK

Mark

[72degrees]

Great to know WestCountry windings are doing this work.

To assist anyone finding these posts in the future I can also recommend.
Rex's Speed Shop:
http://www.rexs-speedshop.com

based near Tonbridge East Sussex UK

Mark

They did my last one.

[pedro]

To assist anyone finding these posts in the future I can also recommend.
Rex's Speed Shop:
http://www.rexs-speedshop.com

Another call for Rex's, the first one they did failed but was repaired promptly and without fuss.

[Firingonone]

I'm afraid that wasn't my recent experience with Rex Speedshop at all and I would not recommend them.

[Canuck750]

Westcountry Windings came through with flying colours, shipped from Canada, repaired and returned in about one month, 300 pounds for the pair which included shipping, great communication and great workmanship, I asked them to not rewind or fit the ignition coil as I have fitted new electronic ignition with battery / coils.



so glad to have these repaired, I can now trust my 500 will keep the battery charged and my 3-1/2 will get retrofitted to the same Elektronik Sasche ignition and Dyna mini coils.