Page 1 of 1
Brake pedal sport 77
Posted: 16 Mar 2025 15:13
by Motomat350
Hello Morini experts:)
Was wondering how the brake pedal would normally mount. Does this look normal?
Do I need a special bolt with a spacer, to fit the brake pedal.
- Screenshot 2025-03-16 at 16.11.02.jpg (144.78 KiB) Viewed 1963 times
- Screenshot 2025-03-16 at 16.10.48.jpg (226.37 KiB) Viewed 1963 times
Re: Brake pedal sport 77
Posted: 16 Mar 2025 19:32
by MickeyMoto
I think it should be flush then held by a bolt and washer.
Re: Brake pedal sport 77
Posted: 16 Mar 2025 19:45
by GHF
- B8AD4B91-1F0B-4DC8-BAD7-D52EAE150A5B.jpeg (34.23 KiB) Viewed 1939 times
Mine has a flat washer and bolt.
Gordon
Re: Brake pedal sport 77
Posted: 18 Mar 2025 11:54
by Motomat350
Thank you Mickey and Gordon.
Much appreciated
Happy riding
Re: Brake pedal sport 77
Posted: 18 Mar 2025 16:27
by RedVee
Mines a '77 Strada and it's the same as Gordon's apart from the washer being shinier!
Re: Brake pedal sport 77
Posted: 20 Mar 2025 10:55
by GHF
- CFD32ECE-40DB-4300-A833-6B4372842C0E.jpeg (37.5 KiB) Viewed 1632 times
I have to be honest and say I didn’t think it would come up that clean…..but that’s as far as I am going with it at the moment.
Re: Brake pedal sport 77
Posted: 21 Mar 2025 11:21
by Motomat350
Very nice
Does any of you know the depth of the mounting?
I got a brake pedal from a Strada. Wonder if it differs from the Sport model, other than being too long..
Re: Brake pedal sport 77
Posted: 21 Mar 2025 18:02
by GHF
- 62F2050B-89F3-40C7-B2AE-97F94BAF152E.jpeg (91.75 KiB) Viewed 1345 times
If this is the required measurement.
I measured mine at 27mm.
Re: Brake pedal sport 77
Posted: 22 Mar 2025 09:49
by MickeyMoto
The bolt is M8x14 the washer M8x24 according to my parts list.