Gas tank isolator

The 3 1/2 forum
Post Reply
Bertram3143
Posts: 2
Joined: 15 Oct 2013 00:39
Location: Granada Hills U.S.A.

Gas tank isolator

Post by Bertram3143 »

Anyone know where the gas tank isolator pn 30.01.10, and bushing pn 13.03.26. These part numbers are based on Morini Parts catalog. Forgot how to cross reference with NLM’s part numbers which I seen Midina uses. Any help would be appreciated.
Clark Bertram
George 350
Posts: 450
Joined: 16 Jun 2007 09:43
Location: Northampton

Re: Gas tank isolator

Post by George 350 »

Hi,
Not too helpful I know, but when I changed mine many, many years ago ( originals were all cracked) I couldn't buy any.
I found some rubber bushes from a pair of rear shocks that were the right outside diameter and cut them to length. I made up a 'top hat' spacer (tube and washer in one piece) to go through it and they are still there today.
If you can't buy them, you too may have to resort to making something to do the job?
Hope this helps,
George
George
350 sport 1978, 350 Strada 1978
650 Norton 1967, 650 Kawasaki 1977 and 650 Enfield 2019
Post Reply