Rebuilding a K2 rear master cylinder

The 3 1/2 forum
Post Reply
AntietamClassicCycle
Posts: 195
Joined: 15 Oct 2012 15:03
Location: Rohrersville, MD, US
Location: Rohrersville, MD, USA
Contact:
Contact AntietamClassicCycle

Rebuilding a K2 rear master cylinder

Post by AntietamClassicCycle »

<Tried searching this multiple ways and came up empty> Need to rebuild the rear master cylinder on my 350 K2. How does the master cylinder come apart? No circlip is evident, just a metal ring.

Image
Top
MickeyMoto
Posts: 2586
Joined: 22 Nov 2008 17:41
Location: Even further oop North

Re: Rebuilding a K2 rear master cylinder

Post by MickeyMoto »

Use a drift and press out from t'other end. Just done mine on a K1, same M/C.
Top
AntietamClassicCycle
Posts: 195
Joined: 15 Oct 2012 15:03
Location: Rohrersville, MD, US
Location: Rohrersville, MD, USA
Contact:
Contact AntietamClassicCycle

Re: Rebuilding a K2 rear master cylinder

Post by AntietamClassicCycle »

Thanks. Paul gave me the same info. on another forum. Got the master cylinder rebuilt, refitted and the system bled out last evening. Good to go now.
Top
Post Reply

Return to “Tre e mezzo”