Hello folks,
I seem to remember reading about alternative brake/clutch levers that will fit onto my 3 1/2 Sport, from a Yamaha or a Suzuki?, anyone have any ideas?.
Thanks,
Alan
Levers
-
George 350
- Posts: 521
- Joined: 16 Jun 2007 09:43
- Location: Northampton
Re: Levers
Hi.
I have used Yamaha RD250/350 brake levers in the past (pretty LC) when genuine Grimeca ones were not readily available.
Profile is almost identical, but the 'adjuster' has a different thread, so make sure you get that with the lever.
Never found a decent fitting alternative clutch lever whenever I needed one though.
George
I have used Yamaha RD250/350 brake levers in the past (pretty LC) when genuine Grimeca ones were not readily available.
Profile is almost identical, but the 'adjuster' has a different thread, so make sure you get that with the lever.
Never found a decent fitting alternative clutch lever whenever I needed one though.
George
George
350 sport 1978, 350 Strada 1978
650 Norton 1967, 650 Kawasaki 1977 and 650 Enfield 2019
350 sport 1978, 350 Strada 1978
650 Norton 1967, 650 Kawasaki 1977 and 650 Enfield 2019
Re: Levers
Domino do a brake lever that fits, with the correct thread for the adjuster but the lever is a bit shorter.
http://www.splatshop.co.uk/domino-f-bra ... 0wodQhEFKg
http://www.splatshop.co.uk/domino-f-bra ... 0wodQhEFKg
Re: Levers
I found an MZ (disk brake model) lever fitted on my 350 strada.