Page 1 of 1
morini only runs on high revs
Posted: 15 Jun 2016 20:00
by kellytg
hi guys today i start up my morini i change my pickup and advance him and morini start but only on high revs he run...i try to adjust mixture but he turn off....any advice about this problem?
Re: morini only runs on high revs
Posted: 15 Jun 2016 20:16
by EVguru
Have the carburettors been ultrasonically cleaned?
I made a video on carb setup;
https://youtu.be/TEdK7DNuNfM
Re: morini only runs on high revs
Posted: 15 Jun 2016 21:13
by kellytg
hi paul..carbs are cleaned.. i saw your video and i dont have sincroniyser...i have one problem too morini wont start on kick start
he just push it back...
Re: morini only runs on high revs
Posted: 15 Jun 2016 21:34
by EVguru
kellytg wrote:i saw your video and i dont have sincroniyser
Google "diy carb balancer"
i have one problem too morini wont start on kick start he just push it back...
The standard ignition does not fire until after top dead centre at kickstart speed, so it won't normally kick back.
If your bike is kicking back, they you're running the ignition far too advanced.