MRC Forum- brought to you by www.morini-riders-club.com

Posted: **23 May 2011 17:59**

Have anyone found a suitable coil former to use when rewinding the ignition coil?
Mine broke to several bits when i remowed it for a rewind...

Posted: **24 May 2011 06:08**

I think Vespa PX or T5 coils fits...
http://scootersauce.com/index.php?main_ ... 924d461ac5

here mor models that had this coil fitted
http://www.sip-scootershop.com/EN/Produ ... GGIO+.aspx
http://www.sip-scootershop.com/EN/Produ ... O+for.aspx

check your local scooter shop, they will have them and you can compare the broken bits with the new one

Posted: **24 May 2011 20:03**

Thanks! Will check the local vespa shops in the next days, and post the result.

Posted: **29 May 2011 15:57**

Vespa PX it is!

Meet a very helpful mecanic at a vespa shop, who had a complete stator plate with defect charge coils he gave me.

Vespa plate to the right. Note this is early type with contact breaker.

Ignition coils, broken morini to the right.

The copper wire on the vespa coil is way to thick and has litterally no resistance so it can not be used. Ready with the new 0.125 wire.

Ignition coil former