Spokes dimensions for sport 77 disc and drum

[Motomat350]

Hello all Morini’ist

Does anyone know the exact specs. For the Borrani rim’s spokes on a 350 sport 77 disc front, and drum rear wheels?
- or any alternative non custom made spoke set that will fit?

Happy riding

[Motomat350]

Seems impossible to find any data for these spokes

[Morini Jen]

The old Dutch Morini Club website has an article by someone who restored a 3½ Sport with wire wheels, twin discs and Borrani rims. There is a little bit of information about the spokes.

Here is a link to the article...

https://www.morini-riders-club.com/Nede ... oject.html

He sent the wheels to be rebuilt by Haan Wheels in The Netherlands. They may well have the data you are after...

https://www.haanwheels.com/classic-vint ... ls/spokes/

The photo shows the finished result...

[Motomat350]

Thanks Morini Jen

I did see that article, and have ben I touch with Haan wheels. Unfortunately they don’t have the data.

Maybe I’ll just have to guesstimate the measurements, and see how how it turns out..

[123morini]

Hello ,

I have photos of a complete front wheel but I can't sent them on this forum .
The Ø of the spokes are 3.5mm and the total lenght is 170mm .
And the spokes are fit inside an outside of the hub .

[Motomat350]

Thanks 123Morini

Do you know the bend angles and lengths ?

[123morini]

Hi ,

About the bend angles and lengths I will measure them .
Concerning the photos of the complete wheel I can only send them by e-mail because I am not smart enought to place them on this forum .

Christian .

[Steve Brown]

Thanks 123Morini

Do you know the bend angles and lengths ?

I think those angles quoted in the reply from Jenny are accurate.

[morinisport]

Hello All,

Picking up on this timely thread - I am also looking to re-lace a pair of ‘76 Sport wheels that I foolishly cut the hubs out of probably 25-30yrs ago - with the intention of doing it at that point in time.

Very useful information posted above re. Front wheel spoke spec. - would anyone happen to know the spoke length(s) and bend angle(s) for the rear Sport drum wheel?

Thank you!

[Steve Brown]

I can't help with the lengths sadly but I'm sure that Central Wheel co have supplied them in the past. They usually keep records and specs for everything they've done.

[morinisport]

Thanks Steve that is a good call - will ask them.