G&A
- IMG_20241119_1634114(s).jpg (189.88 KiB) Viewed 3554 times
Solved(?) - Clutch plate is from 250 Single?
Solved(?) - Clutch plate is from 250 Single?
Anybody recognise this? It's the same size as a regular 31/2 clutch friction plate. It was in a bunch of Morini parts we recently bought. So we would like to understand what it fits.
G&A
G&A
Last edited by BumbleBee on 17 Feb 2025 21:12, edited 1 time in total.
Re: Clutch, But which Model?
501 ? Later model 350 ?
-
morini_tom
- Posts: 1021
- Joined: 05 May 2006 13:47
- Location: Northampton
Re: Clutch, But which Model?
With outer teeth like that it’s not any of the air cooled dry clutch vee twins. Later 350 and 500 clutches were basically the same as the earlier ones,
Re: Solved(?) - Clutch plate is from 250 Single?
Based on the information available this appears to be a brand new friction plate from a 250 Single.
Re: Solved(?) - Clutch plate is from 250 Single?
A 250T clutch plate has inside diameter 9.5cm. Does it have friction material on both sides? If not, it is the special half-plate of which there is only 1 in a set. If both sides, you need another 6 to go with it.
Re: Solved(?) - Clutch plate is from 250 Single?
Yes it is 9.5cm inside diameter.
Yes it has friction material on both sides.
I have a total of 5 brand new, but they don't fit my 3½. So probably they are for sale sometime soon.