Anyone know where the gas tank isolator pn 30.01.10, and bushing pn 13.03.26. These part numbers are based on Morini Parts catalog. Forgot how to cross reference with NLM’s part numbers which I seen Midina uses. Any help would be appreciated.
Clark Bertram
Gas tank isolator
-
George 350
- Posts: 520
- Joined: 16 Jun 2007 09:43
- Location: Northampton
Re: Gas tank isolator
Hi,
Not too helpful I know, but when I changed mine many, many years ago ( originals were all cracked) I couldn't buy any.
I found some rubber bushes from a pair of rear shocks that were the right outside diameter and cut them to length. I made up a 'top hat' spacer (tube and washer in one piece) to go through it and they are still there today.
If you can't buy them, you too may have to resort to making something to do the job?
Hope this helps,
George
Not too helpful I know, but when I changed mine many, many years ago ( originals were all cracked) I couldn't buy any.
I found some rubber bushes from a pair of rear shocks that were the right outside diameter and cut them to length. I made up a 'top hat' spacer (tube and washer in one piece) to go through it and they are still there today.
If you can't buy them, you too may have to resort to making something to do the job?
Hope this helps,
George
George
350 sport 1978, 350 Strada 1978
650 Norton 1967, 650 Kawasaki 1977 and 650 Enfield 2019
350 sport 1978, 350 Strada 1978
650 Norton 1967, 650 Kawasaki 1977 and 650 Enfield 2019