MRC Forum- brought to you by www.morini-riders-club.com Member: g7AW3f

3X seem to be selling off their parts for MM on Ebay.
Are these parts cheap or at the original price, if they are cheap should we do something about it? 3X price £124.99.
I've emailed the factory asking for a price on a front screen for the Corsaro to see if they are the same price.

I have had an answer from the Factory, from Giulia in spares, about the front screen. It's recommended that I contact 3X to get the part. Oh well it's gone so I'll have to re-spray the one I've got.
What is the colour code for the Silver on a silver and black Coesaro 1200?

Reply copied below.

Is anyone thinking of going to the factory for a visit?


Dear George,

as far as your request of spare parts we have to communicate you that you have to make your order to Three Cross Motorcycles. You can find all the details below.



Best regards

United Kingdom


Three Cross Motorcycles Ltd


Woolsbridge Industrial Estate, Three Legged Cross, Wimborne, Dorset, BH21 6SP


Tel. (01202) 824 531
Fax.
email. RICHARD.DAVIES@3XMOTORCYCLES.COM

might be a ducati silver. I have some multistrada silver looks almost identical.
I'll have another look and see how it matches up

the black/silver fairing is still for sale by 3x on ebay , if that is the part you are looking for @approx £125

I'm sure I saw some cylinder heads earlier but there not there now, strangely the claimed to be both 9/12 & corsaro compatible but I am sure they had different size valves when I saw them in the factory?

David

9.5 exhaust valves sizes

morini part number m97400004400 the inlet measures approx 40mm diameter
m97400005400 the exhaust measures approx 34mm diameter

according to 3x these supposedly fit the 9.5/granpasso/corsaro veloce , but that was an incorrect ebay listing and these part numbers are for the 9.5 only. Whether they then fit the sport,scrambler,granpasso (as these are the detuned engines) maybe someone can elaborate.

So are the corsaro and the lower state of tune engines achieved by different valve sizing , if so why does the corsaro veloce according to 3x accept the same cylinder head as all models (9.5,granpasso,scrambler) with the exception of the standard corsaro which strangely according to them has different porting.

Oh well , you learn every day