I posted many years ago as an American, living in Germany with a perchant for little known Italian bikes, but grew silent for a number of reasons, mostly having to do with the fact that I didn't get much riding time. Well, I'm still an American but no longer in Germany, most importantly though I still have my 1200 Scrambler. I just got the bike 'tagged, titled and taxed' last week so the bike is fully legal and on the roads now. To my knowledge, this is the only modern Morini in the states. It is extremely difficult to pull off getting an imported bike/car imported and tagged here is the states, so I'm rather lucky there. So, here is something you won't see often (or ever) again....
A Morini under the Spanish moss of coastal Georgia.... but I digress.
My real reason of popping up here is that I need to find a source for oil filters for the bike now that I am further away from the bike's homeland. I did some searching and did some cross referencing and found the K&N 152 listed as a option for the MM 1200. You can find the listing page here... http://www.carpimoto.com/EN/Bike_Morini ... KN-152.htm and the K&N filter page with all the measurements here.. http://www.knfilters.com/search/product ... rod=kn-152 . Does this look like the right filter to those a bit more knowledgeable on the topic than myself? I'd appreciate any thoughts you could provide. Obviously my local bike shops are at a loss for helping me at all on this topic. I'm a bit on my own for these sorts of things.
Thanks for your input.
