Morini with BSA-engine

[hombre]

Hi all,

I've seen a picture once of a Morini with a BSA twin in there, but cannot recall where I saw it. Anyone know where it is?

tia,
Hans

[SteveMRC]

Was it this one?


Don't know why I asked that, how many BSA engined Morinis are there anyway ?

[hombre]

Yep exactly! I know someone with the same plan. This might insipire him...
Thanks!

[morinipete]

That'll be mine then........

'Still have an oil pump problem on it, which requires a full strip. It's on my 'to do' list but due to this being rather large it will NOT be on track at Cadwell this year. Hopefully next.........................

When I do get stuck into it again I'll do an artcle on it for ATG, as it is a bit special (it's a full 740 Devimead motor, with a lot of Tony Price bits in it. Anyone who saw Tony race against modern bikes in the 1980s on an A65 will know quite how special he and his BSAs were - though it was admittedly 99% rider).

Pete

[hombre]

Great looking bike Pete

[hombre]

Hi all, I was wondering if I can find this photo again somewhere. There's someone talking about fitting another engine in a Moriniframe and I want to suggest this one...

[72degrees]

Hi all, I was wondering if I can find this photo again somewhere. There's someone talking about fitting another engine in a Moriniframe and I want to suggest this one...

The SWM 250 Rotax disc valve 2T MX engine I nailed into a 2C worked very well at Caldwell

[Ming]

The SWM 250 Rotax disc valve 2T MX engine I nailed into a 2C worked very well at Caldwell

Gee - how many 2Cs have you got??

[72degrees]

The SWM 250 Rotax disc valve 2T MX engine I nailed into a 2C worked very well at Caldwell

Gee - how many 2Cs have you got??

Only two these days, plus a spare frame that might yet get used for another 'project'. The 'Rotarini' 250 was for short circuit racing in the 250 single class and hill climbs. Got me one or two pots at Three Sisters circuit. Long gone now as the Rotax power cracked the frame.

[solviken]

Recall seeing a BSA Gold Star engined Morini in Classic/Vintage racing in the mid 90s. Also featured in the BSA Gold Star owners club magazine articles too. Low oil pump gets in the way of the frame rails so needs frame mods just like the BSA frame 'kink!'

[morinipete]

Hi Hombre,

I'm in Nigeria at the moment. When I get back I have some pictures somewhere, including of the 'build', which I'll post (if I remember!). An A65 goes in a treat. As though it's made for it.

I used to have a mate who raced an XT500 in a 350 frame and knew the guy with the Goldstar engined version mentioned above. I have some pics of that somewhere too, so I'll add it to the 'to do' list, but I wouldn't hold your breath!).

Pete

[hombre]

Hi all, I was wondering if I can find this photo again somewhere. There's someone talking about fitting another engine in a Moriniframe and I want to suggest this one...

The SWM 250 Rotax disc valve 2T MX engine I nailed into a 2C worked very well at Caldwell

Pictures please!!

[hombre]

Hi Hombre,

I'm in Nigeria at the moment. When I get back I have some pictures somewhere, including of the 'build', which I'll post (if I remember!). An A65 goes in a treat. As though it's made for it.

I used to have a mate who raced an XT500 in a 350 frame and knew the guy with the Goldstar engined version mentioned above. I have some pics of that somewhere too, so I'll add it to the 'to do' list, but I wouldn't hold your breath!).

Pete

Thanks Pete, the XT-version sounds pretty good too... By now I have some friends in the Dutch XT-club who might like them!