Search found 1402 matches
- 26 Apr 2024 21:14
- Forum: Bikes and bits wanted
- Topic: 500 electronic ignition
- Replies: 19
- Views: 3544
Re: 500 electronic ignition
Mickey your rotor is different at least-I can't say about the circuit board except to say I'd still prefer that to be adjustable. He must have upgraded it a little. Keep us posted on how it performs longer term-Barry too please!
- 25 Apr 2024 09:55
- Forum: Bikes and bits wanted
- Topic: 500 electronic ignition
- Replies: 19
- Views: 3544
Re: 500 electronic ignition
It'll be a while yet, I am recovering from a tendon operation and can't get my foot on the foot peg, although things are improving. Steve, I agree with the rotor problem. It would be better to use the existing key on the cam and slot the circuit board. The ease of getting the timing correct (set pm...
- 25 Apr 2024 09:46
- Forum: Bikes and bits wanted
- Topic: 500 electronic ignition
- Replies: 19
- Views: 3544
Re: 500 electronic ignition
That's a shame. Is the ignition still on the bike, or did you change to something else? I've not double checked mine with the strobe yet, but it does at last tick over again and when I took it out on the motorway yesterday, it's found another 10 mph from somewhere and will rev pretty much to the re...
- 25 Apr 2024 09:30
- Forum: Tre e mezzo
- Topic: new to morini
- Replies: 10
- Views: 153
Re: new to morini
Welcome to the mysterious world of Morini! As Norbert says-all this depends on the year of your bike, what Luigi on the production line had to hand, what has been changed by well-meaning owners in the intervening decades plus what the broke, wore out or otherwise bodged up. A lot of owners will pers...
- 23 Apr 2024 16:38
- Forum: Bikes and bits wanted
- Topic: 500 electronic ignition
- Replies: 19
- Views: 3544
Re: 500 electronic ignition
Glad to hear you are having success with the SWF system. I had high hopes for it but struggled to get the timing right. The only adjustment was by rotating the trigger rotor on the camshaft. I think it would have been better if the back plate had adjustment slots like the original parts. Anne did se...
- 15 Apr 2024 16:50
- Forum: Factory customs
- Topic: Excalibur jetting
- Replies: 5
- Views: 373
Re: Excalibur jetting
Thanks for the replies. The problem I had was that the set up shown on the Dutch website and other places were either for VHB carbs or PHBL carbs fitted to 500's; that's good for idle & main jets but no help for needle or emulsion tube sizes. I have now found a chart on the forum that suggest t...
- 14 Apr 2024 17:56
- Forum: Factory customs
- Topic: Excalibur jetting
- Replies: 5
- Views: 373
Re: Excalibur jetting
With a different less quiet exhaust and the airbox opened up I would expect just the main jet would need raising. A 350 Strada/Sport would have a main jet of 110/112/115 so that would probably be as large as needed. It may only need 95 or 100. You'll have to experiment I'm afraid as the exhaust requ...
- 10 Apr 2024 22:05
- Forum: Tre e mezzo
- Topic: And still, I remain confused...
- Replies: 5
- Views: 305
Re: And still, I remain confused...
Fuel remaining at reserve is not a good indicator of range. How much can be used? The tank may not run dry before the fuel stops flowing. Also, do you really want to drain the bottom of the tank, it is probably full of crud which will block the filters on the taps and the carbs and some will find i...
- 09 Apr 2024 22:55
- Forum: Tre e mezzo
- Topic: And still, I remain confused...
- Replies: 5
- Views: 305
Re: And still, I remain confused...
You'll only find out if you do as you say and actually measure it. The amount left when you hit reserve depends on the height of the stand pipe inside the main tap. By now the chances are the tap has been replaced (ie your mechanical tap) and who knows what is there now. I sometimes have cut that pi...
- 06 Apr 2024 18:42
- Forum: Projects
- Topic: Valentini Replica
- Replies: 12
- Views: 374
Re: Valentini Replica
Julian-you mean Alldens, yes? If so his name is Dennis and he's an old colleague of Ivan Appletons' so you can name drop both Ivan and me plus Tom as well. ![Wink :wink:](./images/smilies/icon_wink.gif)
![Wink :wink:](./images/smilies/icon_wink.gif)
- 05 Apr 2024 21:33
- Forum: Projects
- Topic: Valentini Replica
- Replies: 12
- Views: 374
Re: Valentini Replica
Hi Tom and Julian, I'm taking my van and a bike to Stafford so happy to transport exhaust parts if you like. Also while we are on the subject of replica pipes I'd like to recommend Alldens over in Lincolnshire for the job. He made my Camel system and his work is top notch. I know there are other peo...
- 27 Feb 2024 23:08
- Forum: Tre e mezzo
- Topic: Reinstating the electric starter
- Replies: 4
- Views: 519
Re: Reinstating the electric starter
That red+ cable can go either end of the main starter lead. The factory placed it at the solenoid so that when removing /replacing the battery there is only one lead to remember. Makes it a bit neater too, in my opinion. As for the solenoid, I've just replaced one on my 500. It's a Durite item rated...
- 26 Feb 2024 15:01
- Forum: The 500
- Topic: Nlm ignition system
- Replies: 5
- Views: 655
Re: Nlm ignition system
Yes, the pick up does look a bit shakey. To be fair it was fine if you could set it up properly. I was lucky in that Alex set it up for me when I bought it, he had a home made but effective rig to test run the ignition systems, standard or otherwise. Like I said the CDI part works fine still today a...
- 25 Feb 2024 19:23
- Forum: The 500
- Topic: Nlm ignition system
- Replies: 5
- Views: 655
Re: Nlm ignition system
I would say yes it is. The pick up part of the set is the only complicated bit to get right. It needs very close tolerance clearance that is almost impossible to measure. I had the full set on my 350 Sport for a long time and it was never a moments trouble. Then I swapped it to my 500 Camel and I ne...
- 24 Feb 2024 18:51
- Forum: Singles
- Topic: Year of manufacture and model confirmation
- Replies: 1
- Views: 816
Re: Year of manufacture and model confirmation
Maybe it stood unsold in a shop till that date? Registered then rather than manufactured? Undoubtedly you will be best served by getting in touch with the clubs dating expert-approved by DVLA, who will be able to give you a credible dating certificate to help your registration application. Details o...