MRC Forum- brought to you by www.morini-riders-club.com

I get this in 2nd gear only, but the last two racers have told me they had it as well. not making chips in the oil so it can't be too big of an issue.

If I remember correctly for every 1 gallon of gas burned, 2.5 gallons of water is made. So yes normal as others have said.

I'll give you $40 if you can delivery to southern NH.
Nice score

Had some time this past weekend to work on the front carb spigot. I purchased several copper crush gaskets from BelMetric.com here in Billerica Mass part number GCA22x27 they fit the spigot end nicely but tend to walk around a bit so you must take care when tightening down on to them. I used a Strap...

Thank you for the picture that clears it up, as the other post I'd seen had a picture of a homemade tool a socket with some key stock welded to it. My plan going forward is to use a copper hollow crush gasket under the tread just like in the exhaust to seal and help load the threads keeping thing ti...

Hello all. Due to my 3 1/2 being set up as a flat tracker it no longer has a air box the front cyl carb runs long the bottom of the tank those the intake has to be unscrewed part way. The old cast metal just isn't up to the abuse, I've read there is a Steel unit available but i don't know if it is t...

How did it go? How much boost are you running? Got Pictures?

Thank you FastHarry. I've used a bore scope down the plug hole i did not see any Valve marks on the piston when doing the repairs. Leak down testing showed the front cyl better then the rear by 1 %. I've not had time due to shutdown week at work to do a post race inspection but it was running good w...

Hello All. Tony Leary here, in the USA. I've recently begun racing (Flat Track) a late friends 350 that was 1st done up as a "Street Tracker" in the early 80's and turned in to a race bike when another friends bike broke they striped off the lights and raced it. It does seem to run well ho...

https://www.facebook.com/photo.php?fbid ... 3&theater

Hello All. Tony Leary here, in the USA. I've recently begone racing a late friends 350 that was 1st done up as a "Street Tracker" in the early 80's and turned in to a race bike when another friends bike broke they striped off the lights and raced it. It does seem to run well however at one...