Search found 753 matches
- 12 May 2024 23:55
- Forum: Tre e mezzo
- Topic: Strada MK5 Front Spindle washer
- Replies: 8
- Views: 162
Re: Strada MK5 Front Spindle washer
I can confirm whar George said.The washer is not needed with sealed bearings.
- 30 Apr 2024 11:08
- Forum: Off road bikes
- Topic: Oil seal quick help
- Replies: 1
- Views: 160
Re: Oil seal quick help
350 and 500/501 crankshaft right side: 30-40-7 Camshaft right side: 15-24-7 gear changing: 14-22-4 (or 5) sprocket: 20-30-7 Have a look behind the alternator wether the three allen screws that hold the bearing carrier for the right hand crankshaft are loose. If so, this will be considerable oil-leak...
- 24 Apr 2024 22:38
- Forum: Tre e mezzo
- Topic: new to morini
- Replies: 18
- Views: 857
Re: new to morini
All these things depend on the year of production and if you have in mind to have a 100% original one (quite rare after all these years!). A foto and frame number would help a lot for orientation
- 05 Apr 2024 19:58
- Forum: The 500
- Topic: Kick starting technique
- Replies: 7
- Views: 809
Re: Kick starting technique
If I want to be sure that my 501 starts first kick (or second): the two chokes open, one slow kick without ignition, then looking for compresion, ignition on and a firm kick. Then immediatley one choke off, the second after about 2-500m. Starting a 501 by kicking is nearly impossible without looking...
- 18 Mar 2024 23:15
- Forum: Tre e mezzo
- Topic: Lighting circuit problem
- Replies: 16
- Views: 2560
Re: Lighting circuit problem
Do you have 12 V on the brown cable entering the regulator with ignition on? If not the regulator won´t work.
- 17 Mar 2024 10:19
- Forum: Tre e mezzo
- Topic: Best 31/2 cam for all-round flexibility?
- Replies: 19
- Views: 2712
Re: Best 31/2 cam for all-round flexibility?
Yes, they do.
- 16 Mar 2024 23:56
- Forum: Tre e mezzo
- Topic: Best 31/2 cam for all-round flexibility?
- Replies: 19
- Views: 2712
Re: Best 31/2 cam for all-round flexibility?
The Strada pistons have a distance of 6 mm from the lowest to the highest points of the upper "heron surface" . This distance is 7 mm with the Sport pistons, what makes more compresion. The pistons for the nicasil cilinders also have these 7 mm (perhaps a bit more?) like the sport ones. fr...
- 13 Mar 2024 11:04
- Forum: Factory customs
- Topic: Stator Question
- Replies: 15
- Views: 3043
Re: Stator Question
Green and white wire should be longer because they go to the central electic port. The yellow ones have a shorter way to de regulator. I still can´t find a reason why one of the yellow ones is marked.
- 07 Mar 2024 10:38
- Forum: Factory customs
- Topic: Stator Question
- Replies: 15
- Views: 3043
Re: Stator Question
I don´t see any reason for the 1 ferrule on one of the yellow wires, there should be none.
No idea of the part number.
No idea of the part number.
- 06 Mar 2024 12:07
- Forum: Factory customs
- Topic: Stator Question
- Replies: 15
- Views: 3043
Re: Stator Question
So it will be a "bodyless" stator, with the wire wound directly on the steel-plate-paket. It´s the strongest one with about 200W körperlose Lima.JPG Cannot find a better foto. This one is quite uggly. Only the ignition coil has a plastic body (this one burnt) So probably you also have one ...
- 05 Mar 2024 01:05
- Forum: Factory customs
- Topic: Stator Question
- Replies: 15
- Views: 3043
Re: Stator Question
A late Excalibur stator should be a Kokussan one.
- 02 Mar 2024 16:51
- Forum: Tre e mezzo
- Topic: Best 31/2 cam for all-round flexibility?
- Replies: 19
- Views: 2712
Re: Best 31/2 cam for all-round flexibility?
When one cilinder is off, you can see with a dentists mirror the stamp on the cam . If there is none it´s a strada one.
- 29 Feb 2024 19:11
- Forum: Tre e mezzo
- Topic: Reinstating the electric starter part 2
- Replies: 9
- Views: 1252
Re: Reinstating the electric starter part 2
As far as I know tere are two diferent casing for Street- and Enduromodels. And of course the casings for the Kokussan alternator
- 27 Feb 2024 11:37
- Forum: Bikes and bits for sale
- Topic: Two seats for MM500 (and 350K)
- Replies: 2
- Views: 853
Re: Two seats for MM500 (and 350K)
Hi Tom,
I would take the sport seat.
message sent
I would take the sport seat.
message sent
- 26 Feb 2024 11:03
- Forum: The 500
- Topic: changing capacity to 501
- Replies: 8
- Views: 1254
Re: changing capacity to 501
No, as said above, it´s a 500 (478ccm) 6 gear bottom end with 501 cilinder an heads plus a L5 cam. The rims are brandnew ones from Morad/Spain bought 15 years ago.