I'm looking for Attrezzo speciale 009, tool # 009 to adjust timing for moto morini 3 1/2. Even drawing (copy) with dimensions of it would be greatly appreciated.
I'm the owner of 1978 3 1/2 S.
Thanks, Adam
tool # 009
-
- Posts: 834
- Joined: 10 Mar 2009, 10:13
Re: tool # 009
That's one I never had and my timing is always okay 
Just put the pulleys inline with the marking on the casing as in the blue book and you be fine, double check by rotating the engine by hand first so you know nothing's in the way and strobing it when finished rebuilding.

Just put the pulleys inline with the marking on the casing as in the blue book and you be fine, double check by rotating the engine by hand first so you know nothing's in the way and strobing it when finished rebuilding.
-
- Site Admin
- Posts: 1267
- Joined: 25 Feb 2009, 16:06
- Location: Den Haag (NL)
- Contact:
Re: tool # 009
Follow this link for timingbelt replacement: http://www.angelfire.com/mo2/sr500/Zahn ... iemen.html
Some tips:
1) carefully keep the nuts/rings etc which come off in the correct following order,
2) use the right torque (see the workshop manual) for the central nut when re-assembling,
3) use a tiny bit of Loctite for this central nut, just for safety.
Some tips:
1) carefully keep the nuts/rings etc which come off in the correct following order,
2) use the right torque (see the workshop manual) for the central nut when re-assembling,
3) use a tiny bit of Loctite for this central nut, just for safety.