KANGURO RUBBER BAND...

Camel, Sahara, Kanguro, Coguaro
Post Reply
sikadellic
Posts: 12
Joined: 20 Sep 2018 21:51
Location: salisbiry
Location: Salisbury ...so nice they poisoned it twice.

KANGURO RUBBER BAND...

Post by sikadellic »

Hello people So she is running and the electrics are sorted... so I am putting her back together, Now when it arrived the headlight cowl was held on by what appeared to be a giant rubber band ! It went around the forks and hooked onto either side... Is that it ? I am all for simple, but did they come out of the factory like that ? Anyway the rubber had gone like an old bungy. So I will find something to replace it. There is a small hole on the left hand side underneath where the rubber band lays so I don't know what that is about. Thanks for any help. Simon.
]It is NEVER too late for a happy childhood.
sikadellic
Posts: 12
Joined: 20 Sep 2018 21:51
Location: salisbiry
Location: Salisbury ...so nice they poisoned it twice.

Re: KANGURO RUBBER BAND...

Post by sikadellic »

found some photos looks like thats meant to be there then!
]It is NEVER too late for a happy childhood.
User avatar
Ming
Posts: 798
Joined: 01 Aug 2014 16:32
Location: France
Location: Central France

Re: KANGURO RUBBER BAND...

Post by Ming »

As I recall, the rubber bands (like large O rings) fit around a moulded 'flange' on the two sides of the headlamp nacelle, round the forks and fixed inside the nacelle. I replaced mine with a couple of lengths of narrow bungee cord.
Cosmo
Posts: 23
Joined: 12 Jul 2018 15:13
Location: Kent, UK
Location: UK

Re: KANGURO RUBBER BAND...

Post by Cosmo »

Here is what it looks like as standard from my X1 before I modded it. Yup it really is just a bungee cord around the stanchion.
Attachments
Kanguro cowling mounting
Kanguro cowling mounting
IMG_20180523_203459~3.jpg (45.85 KiB) Viewed 3847 times
Cosmo
Moto Morini 3 1/2 Strada & 350 Kanguro special
Post Reply