350 Strada rear chain front cover cover

Post Reply
bowerman3678
Posts: 2
Joined: 10 May 2020 11:18
Location: Teignmouth

350 Strada rear chain front cover cover

Post by bowerman3678 »

Wanted, the small cover at the front of the drive chain, part number 37.03.10. I cannot find one on the lnterweb, so has anyone got one in whatever state I would be very interested. Many thanks
Giles Bowerman
norbert
Posts: 750
Joined: 15 May 2007 15:15
Location: Lübeck/Germany

Re: 350 Strada rear chain front cover cover

Post by norbert »

They are diferent depending if they are for a smal alternator cover or the big electric start one. I guess that info would help better than the part number :wink:
k-DSCI0509.JPG
k-DSCI0509.JPG (44.97 KiB) Viewed 2319 times
I prefer this handmade ones
k-DSCI0510.JPG
k-DSCI0510.JPG (53.22 KiB) Viewed 2319 times
bowerman3678
Posts: 2
Joined: 10 May 2020 11:18
Location: Teignmouth

Re: 350 Strada rear chain front cover cover

Post by bowerman3678 »

Definitely small alternator cover type. 1975 Strada, no electric start.
User avatar
Daddy Dom
Posts: 512
Joined: 16 Nov 2006 19:48
Location: Auckland, New Zealand

Re: 350 Strada rear chain front cover cover

Post by Daddy Dom »

I have the part but not the sticker.

I want a sticker!! :shock: :D
DD
MRC 3082½
3potjohn
Posts: 1243
Joined: 02 Jun 2007 13:58
Location: Devon

Re: 350 Strada rear chain front cover cover

Post by 3potjohn »

Yes we all want the sticker.I got a quote about 18 months ago but did not progress it.
I think 30 quid for ten + vodka and tonic. Only unknown was whether or not it would tolerate the heat.
No 3 son’s other half is talking about work placement in that big island near you, so if I do follow it up guess I can post it from there.
John
User avatar
Daddy Dom
Posts: 512
Joined: 16 Nov 2006 19:48
Location: Auckland, New Zealand

Re: 350 Strada rear chain front cover cover

Post by Daddy Dom »

I'd definitely have one! Something for the club to follow up, perhaps?

I wouldn't imagine that area gets more than hot to the touch though, would it?
dd
MRC 3082½
3potjohn
Posts: 1243
Joined: 02 Jun 2007 13:58
Location: Devon

Re: 350 Strada rear chain front cover cover

Post by 3potjohn »

By way of an update.
The cover on my Coguaro had a worn bolt hole . Yesterday I made another from a sheet of aluminium. The work of maybe an hour, using my limited tools. Tinsnips,vice, dremel, drill. Sprayed with heatproof gloss black engine paint.
This then brings me back to the sticker.
Before progressing can anyone check this?

I think dimensions could be 65 x40mm ,arrow 35mm
Text :
ATTENZIONE: Inserer l’asta livello olio in direzione della freccia
ATTENTION:Put in the dipstick in the direction of arrow
Post Reply