Just doing the sensible and converting my sport to a 520 chain. I have the front sprocket but need a rear.
I’ve contacted B&C express as I know others have had good service from them, but in the meantime, on the off chance someone has a new 520 5 bolt sprocket on the shelf, i’d be interested.
If I end up having one made by B&C then doing a group buy may be better for all involved, so let me know if you want one and I’ll find out cost for a batch
Wanted- 5 bolt sprocket in 520 size
-
- Posts: 928
- Joined: 05 May 2006 13:47
- Location: Northampton
-
- Posts: 2420
- Joined: 22 Nov 2008 17:41
- Location: Even further oop North
Re: Wanted- 5 bolt sprocket in 520 size
Hi Tom,
How many teeth were you thinking of?
Mike.
How many teeth were you thinking of?
Mike.
-
- Posts: 928
- Joined: 05 May 2006 13:47
- Location: Northampton
Re: Wanted- 5 bolt sprocket in 520 size
As I get older I am Grateful for all the teeth I can get!!
Standard is 38, happy with that but probably wouldn’t mind if it had an extra tooth or two as this bike is going to be more of a scratcher than a distance bike.
What have you?
Cheers,
Tom
Standard is 38, happy with that but probably wouldn’t mind if it had an extra tooth or two as this bike is going to be more of a scratcher than a distance bike.
What have you?
Cheers,
Tom
-
- Posts: 2420
- Joined: 22 Nov 2008 17:41
- Location: Even further oop North
Re: Wanted- 5 bolt sprocket in 520 size
I need to check, but I feel my gearing is a bit high. An older bike, modern fuel and most probably a bit of extra padding!
I think I have a 38, not sure what is on the front.
I think I have a 38, not sure what is on the front.
Re: Wanted- 5 bolt sprocket in 520 size
I have been in touch with B and C myself with a view to getting a 520 x42 tooth rear with a four bolt fixing.Some holdup on blanks apparently?.That sprocket has a 115 mm centre with bolts at 135mm ( if my Aldi caliper is to be believed)
I got a 520 x 38 tooth some years ago when I converted my K, it was running a 530.
John
I got a 520 x 38 tooth some years ago when I converted my K, it was running a 530.
John
Re: Wanted- 5 bolt sprocket in 520 size
Psssst don't tell anybody, but there is a chance that the one of the MuZ 600 might fit
Yes: 520 in 39, 43 and 45 size (Kanguro Camel X2/ X3)
http://www.jtsprockets.com/catalogue/part/JTR18/
Cheers
Tom Morini
Yes: 520 in 39, 43 and 45 size (Kanguro Camel X2/ X3)
http://www.jtsprockets.com/catalogue/part/JTR18/
Cheers
Tom Morini
-
- Posts: 928
- Joined: 05 May 2006 13:47
- Location: Northampton
Re: Wanted- 5 bolt sprocket in 520 size
Thanks Tom,
That’s really useful and does indeed look spot on. But a bit annoying as I’m still waiting for mine which I ordered weeks ago to be custom machined by B&C! (And at about twice the price of an MuZ one )
That’s really useful and does indeed look spot on. But a bit annoying as I’m still waiting for mine which I ordered weeks ago to be custom machined by B&C! (And at about twice the price of an MuZ one )
-
- Posts: 2420
- Joined: 22 Nov 2008 17:41
- Location: Even further oop North
Re: Wanted- 5 bolt sprocket in 520 size
Cleaning my bike today I looked at the rear sprocket I got from NLM in 2018.
JTR1022. A 530 but same hole spacing and hole as the JTR18, which is a 520.
http://www.jtsprockets.com/catalogue/part/JTR1022/
Mike.
JTR1022. A 530 but same hole spacing and hole as the JTR18, which is a 520.
http://www.jtsprockets.com/catalogue/part/JTR1022/
Mike.