Hello everyone,
I am in need of a standard useable 350 11:1 piston for the Red Baron race-bike.
I am willing to pay over the standard Price rate to cover the extra shipping hassle to the states...
Robert In California
11:1 piston needed
-
- Posts: 928
- Joined: 05 May 2006 13:47
- Location: Northampton
Re: 11:1 piston needed
Hermy has oversize NOS sport pistons. IN the USA and at a good price
https://herdan.com/collections/moto-mor ... -comp-4-10
And if you really want standard size then Mdina in the UK are listing them:
https://www.mdinaitalia.co.uk/M170110C.html
https://herdan.com/collections/moto-mor ... -comp-4-10
And if you really want standard size then Mdina in the UK are listing them:
https://www.mdinaitalia.co.uk/M170110C.html
-
- Posts: 187
- Joined: 15 Oct 2012 15:03
- Location: Rohrersville, MD, US
- Location: Rohrersville, MD, USA
- Contact:
Re: 11:1 piston needed
Very little of what Herdan lists on their website is actually available.
Charlie Mullendore
http://www.AntietamClassicCycle.com
http://www.AntietamClassicCycle.com
Re: 11:1 piston needed
Thank you Tom for the reference,
I will look into the new pistons for sure....
I’m not opposed to a serviceable used piston as they have been thermocycled hundreds Or even thousands of times and usually are more “stable” and therefore less prone to scuffing and seizing than new “green” pistons....
My race-bike is not able to do long Gentle break-in runs and this could be an issue if these new pistons are not extremely stable right out of the box.....
Robert
I will look into the new pistons for sure....
I’m not opposed to a serviceable used piston as they have been thermocycled hundreds Or even thousands of times and usually are more “stable” and therefore less prone to scuffing and seizing than new “green” pistons....
My race-bike is not able to do long Gentle break-in runs and this could be an issue if these new pistons are not extremely stable right out of the box.....
Robert
-
- Posts: 187
- Joined: 15 Oct 2012 15:03
- Location: Rohrersville, MD, US
- Location: Rohrersville, MD, USA
- Contact:
Re: 11:1 piston needed
I need to check the spare pistons I have from customer Mark's three engine rebuilds, but may have what you need. Will have a look tomorrow and let you know.
Charlie Mullendore
http://www.AntietamClassicCycle.com
http://www.AntietamClassicCycle.com
Re: 11:1 piston needed
That will be fabulous if you have one!
Please let me know,,,,,Robert
Please let me know,,,,,Robert
-
- Posts: 187
- Joined: 15 Oct 2012 15:03
- Location: Rohrersville, MD, US
- Location: Rohrersville, MD, USA
- Contact: