Camel stuff wanted

Post Reply
User avatar
hombre
Posts: 625
Joined: 09 Apr 2006 16:15
Location: Amsterdam/Alessandria
Contact:

Camel stuff wanted

Post by hombre »

Hi all, I am after some stuff to finish one 500 Camel and start the build of a 2nd...
airfilters
housing complete with filters
rear brake cables
tachocables
the rod that keeps the rear brake in place 19.02.39
left footrest, or just the part that attaches to the frame
dashlights
brake pedal
a longshot mx580 390mm
and a very longshot.... two Valentinimufflers for a 2-2 system
one headlightclamps 38mm
rossguzzi
Posts: 433
Joined: 23 Jan 2019 14:21
Location: Perth W/Australia

Re: Camel stuff wanted

Post by rossguzzi »

Air filters are available new from MDina. Beware if using them in dusty (Australian outback) conditions. I believe the air filter housings are hard to find now.
I would be interested to know if there is a rear brake cable supplier too.
Good luck with the build
Cheers.
User avatar
hombre
Posts: 625
Joined: 09 Apr 2006 16:15
Location: Amsterdam/Alessandria
Contact:

Re: Camel stuff wanted

Post by hombre »

I am living below sea level, so hardly any dust ;) Thanks for the tip though!
BumbleBee
Posts: 140
Joined: 13 Jun 2017 21:10
Location: Reading

Re: Camel stuff wanted

Post by BumbleBee »

rossguzzi wrote:Air filters are available new from MDina. Beware if using them in dusty (Australian outback) conditions. I believe the air filter housings are hard to find now.
I would be interested to know if there is a rear brake cable supplier too.
Good luck with the build
Cheers.
Venhill Cables used to have Morini cables of all sorts on their books. Drop them an email they may still have the measurements to work from. They were reasonable prices. Failing that they do one offs from drawings or from worn out ones, though this service is more costly. They are at www.venhill.co.uk
User avatar
hombre
Posts: 625
Joined: 09 Apr 2006 16:15
Location: Amsterdam/Alessandria
Contact:

Re: Camel stuff wanted

Post by hombre »

Thanks for that, the Camel isn't listed but I'll give it a go. If I am not mistaking some cables used on Guzzi's are usable on Morin's too. I'm still after the rear brakecable and one for the tacho.
Post Reply