11:1 piston needed

11:1 piston needed

Postby smotorboy » 23 Sep 2020 15:07

Hello everyone,
I am in need of a standard useable 350 11:1 piston for the Red Baron race-bike.

I am willing to pay over the standard Price rate to cover the extra shipping hassle to the states...

Robert In California
smotorboy
 
Posts: 230
Joined: 04 Oct 2011 17:54

Re: 11:1 piston needed

Postby morini_tom » 23 Sep 2020 19:20

Hermy has oversize NOS sport pistons. IN the USA and at a good price

https://herdan.com/collections/moto-morini-17/products/170111b-o-s-piston-sport-comp-4-10

And if you really want standard size then Mdina in the UK are listing them:

https://www.mdinaitalia.co.uk/M170110C.html
morini_tom
 
Posts: 601
Joined: 05 May 2006 13:47
Location: Northampton

Re: 11:1 piston needed

Postby AntietamClassicCycle » 24 Sep 2020 13:10

Very little of what Herdan lists on their website is actually available.
AntietamClassicCycle
 
Posts: 140
Joined: 15 Oct 2012 15:03
Location: Rohrersville, MD, USA

Re: 11:1 piston needed

Postby smotorboy » 24 Sep 2020 14:47

Thank you Tom for the reference,
I will look into the new pistons for sure....

I’m not opposed to a serviceable used piston as they have been thermocycled hundreds Or even thousands of times and usually are more “stable” and therefore less prone to scuffing and seizing than new “green” pistons....

My race-bike is not able to do long Gentle break-in runs and this could be an issue if these new pistons are not extremely stable right out of the box.....

Robert
smotorboy
 
Posts: 230
Joined: 04 Oct 2011 17:54

Re: 11:1 piston needed

Postby AntietamClassicCycle » 25 Sep 2020 23:45

I need to check the spare pistons I have from customer Mark's three engine rebuilds, but may have what you need. Will have a look tomorrow and let you know.
AntietamClassicCycle
 
Posts: 140
Joined: 15 Oct 2012 15:03
Location: Rohrersville, MD, USA

Re: 11:1 piston needed

Postby smotorboy » 27 Sep 2020 15:24

That will be fabulous if you have one!

Please let me know,,,,,Robert
smotorboy
 
Posts: 230
Joined: 04 Oct 2011 17:54

Re: 11:1 piston needed

Postby AntietamClassicCycle » 29 Sep 2020 03:15

Sent you a PM.
AntietamClassicCycle
 
Posts: 140
Joined: 15 Oct 2012 15:03
Location: Rohrersville, MD, USA


Return to Bikes and bits wanted

Who is online

Users browsing this forum: No registered users and 3 guests

cron