Coguaro 501 for sale
Posted: 05 Jun 2020 09:52
Coguaro 501
I bought this bike as a very unfinished project in 2013 from a member of this forum, in a pretty much completely disassembled state.
The bike currently has about 28,000 kms on the clock and has done around 1500 kms since being rebuilt. It is MOTd until 30th Nov.
It was first registered in the UK in 1998 and is on an 'F' plate.
A mountain of receipts and old MOTs are available. Here is a brief list of work carried out:
Engine completely rebuilt by NLM
Including:
New main bearings and big end bearings
New pistons, valves, valve guides
New korkusan alternator
New clutch
New oil seals throughout.
New starter blocks
New wheel bearings, swing arm bushes
Wheels rebuilt with stainless spokes on original Akront rims & hubs.
New Hagon shock made 20mm shorter (standard size Hagon included) side strand shortened to suit, full length side stand included.
Frame, Swinging arm fork legs etc powder coated
New side panels & tail section
All body work & plasticware resprayed to a high standard
Brakes rebuilt with new seals & pistons, new disks, pads & hoses
New headlights, indicators front & rear, battery.
New chain & sprockets
Exhaust header pipes ceramic coated, stainless silencers, silencer covers powder coated.
Seat recovered
Avon Distanzia tyres
The bike is located in Wiltshire.
PM me with any questions or interest.
Cheers,
Robin
I bought this bike as a very unfinished project in 2013 from a member of this forum, in a pretty much completely disassembled state.
The bike currently has about 28,000 kms on the clock and has done around 1500 kms since being rebuilt. It is MOTd until 30th Nov.
It was first registered in the UK in 1998 and is on an 'F' plate.
A mountain of receipts and old MOTs are available. Here is a brief list of work carried out:
Engine completely rebuilt by NLM
Including:
New main bearings and big end bearings
New pistons, valves, valve guides
New korkusan alternator
New clutch
New oil seals throughout.
New starter blocks
New wheel bearings, swing arm bushes
Wheels rebuilt with stainless spokes on original Akront rims & hubs.
New Hagon shock made 20mm shorter (standard size Hagon included) side strand shortened to suit, full length side stand included.
Frame, Swinging arm fork legs etc powder coated
New side panels & tail section
All body work & plasticware resprayed to a high standard
Brakes rebuilt with new seals & pistons, new disks, pads & hoses
New headlights, indicators front & rear, battery.
New chain & sprockets
Exhaust header pipes ceramic coated, stainless silencers, silencer covers powder coated.
Seat recovered
Avon Distanzia tyres
The bike is located in Wiltshire.
PM me with any questions or interest.
Cheers,
Robin