NOS 350 501 Enduro parts

Morini related only please
Post Reply
Tom
Posts: 424
Joined: 26 May 2010 21:07
Location: The Hague The Netherlands

NOS 350 501 Enduro parts

Post by Tom »

I have some NOS Moto Morini stuff from a former Spanish dealer P.V.P. Unfortunately not everything is complete, or a set:

Engine mounting plate's, mounted on almost all Morini models from the 80's: for all Enduro models, but also 500 road bike and 350 'kinky frame' up to K2. NOS but a little bit shop spoiled 20 Euro's

Image

Image

Chain quard plastic parts 350/ 501 square frame Enduro, 6 Euro's for two (a set)

Image

Image

Image

Rear cilinder exhaust down pipe, both 350 Kanguro (thinner) and 501 Camel (thicker). These are NOS! 60 Euro's

Image

Image

Image

Image

Image

Image

Image

Image

More then one heat shield NOS for front exhaust pipe Kanguro/ Camel/ Coguaro square frame, also Excalibur/ New York: 20 Euro's

Image

Image

Gear shift pedal and shaft Kanguro/ Camel, without the foot and the spring: SOLD

Image

Battery tray and regulator holder, enduro square frame: 10 Euro's a piece. 15 euro's for both.

Image

Image

NOS 40 mm Marzocchi top fork stanchions nuts, for Enduro forks 501 Camel/ Coquaro: 50 Euro's for a set of two nuts.

Image

Image

tomros@live.nl

the Netherlands
Last edited by Tom on 29 Oct 2020 10:55, edited 3 times in total.
'It must be a .....'
Posts: 365
Joined: 12 Sep 2010 12:25

Re: NOS 350 501 Enduro parts

Post by 'It must be a .....' »

Hi Tom, PM sent,
many thanks, Ian
Tom
Posts: 424
Joined: 26 May 2010 21:07
Location: The Hague The Netherlands

Re: NOS 350 501 Enduro parts

Post by Tom »

Hi Ian, where is the Prime Minister? Ciao, Tom
'It must be a .....'
Posts: 365
Joined: 12 Sep 2010 12:25

Re: NOS 350 501 Enduro parts

Post by 'It must be a .....' »

Hi Tom, the PM was hiding, he should be with you soon?
Again thanks, Ian
Tom
Posts: 424
Joined: 26 May 2010 21:07
Location: The Hague The Netherlands

Re: NOS 350 501 Enduro parts

Post by Tom »

Yessss he (can) was in the closet, so minus one monoshock cover, and i have another battery tray available for them who are also messing about with the square frame's
Post Reply