Have parts available from recently dismantled 501 Excalibur, purchased for 501 engined "spcial".
Donor bike low mileage (8000km).
Many parts currently on e-bay auction to view.
Cheque and post, or cash and collect.
Will post on e-bay on "buy it now" if preferred.
Will post overseas if buyer happy with postage.
Let me hear your wants but note the following unavailable:
Engine, carbs and ancillaries.
Forks
Exhausts and silencers.
regards
Steve, Staines area.
1992 Excalibur Parts
Re: 1992 Excalibur Parts
Hi, I am running a 500 Maestro and looking for a rear caliper, not sure if the Excaliber sports a similar item but would welcome any advice if you could confirm suitability. The Maestro is running a Grimeca caliper.
Best Regards Andy
Best Regards Andy
Re: 1992 Excalibur Parts
Hi Andy,
The Excalibur has Brembo calipers, master cylinders and discs, rather than the Grimeca equipment found on the 350 and 500 Sport/Stradas.
I will have a look to see if they could be compatible as I have a 500 Sport and a 500 Strada myself, now that you have me asking myself the question.
I would stick with Grimeca myself, best advice is probably North Leicester, you can almost certainly buy recon kits if not the whole unit for reasonable money.
Regards
Steve
The Excalibur has Brembo calipers, master cylinders and discs, rather than the Grimeca equipment found on the 350 and 500 Sport/Stradas.
I will have a look to see if they could be compatible as I have a 500 Sport and a 500 Strada myself, now that you have me asking myself the question.
I would stick with Grimeca myself, best advice is probably North Leicester, you can almost certainly buy recon kits if not the whole unit for reasonable money.
Regards
Steve
Re: 1992 Excalibur Parts
Hi,
Got my pm?
Got my pm?