The contents of this forum represent the views of the contributors and do not necessarily reflect the views of the Morini Riders Club
https://www.morini-riders-club.com/forum/
https://www.morini-riders-club.com/forum/viewtopic.php?f=4&t=7564
Oops, just seen your other post.MickeyMoto wrote: ↑21 Nov 2023 21:13 Are you sure?
I thought the difference was the input shaft on the 500 is beefier and the sleeve is different, but the hub is the same.
Referee!
MickeyMoto wrote: ↑21 Nov 2023 21:19Oops, just seen your other post.MickeyMoto wrote: ↑21 Nov 2023 21:13 Are you sure?
I thought the difference was the input shaft on the 500 is beefier and the sleeve is different, but the hub is the same.
Referee!
How would the plates be the same if the centre hubs were different?
It's just the diameter of the inner splined part.(where it fits on the gearbox mainshaft) That is a half a tad grosserer in a daimetrical sort of way. Ish. The rest is the same hence no trouble swapping plates. I can't believe I got away with it so long.Steve Brown wrote: ↑21 Nov 2023 23:46MickeyMoto wrote: ↑21 Nov 2023 21:19Oops, just seen your other post.MickeyMoto wrote: ↑21 Nov 2023 21:13 Are you sure?
I thought the difference was the input shaft on the 500 is beefier and the sleeve is different, but the hub is the same.
Referee!
How would the plates be the same if the centre hubs were different?