Page 1 of 1

Fibre Clutch plate thickness

Posted: 18 Oct 2018 14:12
by mbmm350s
Can anyone help and measure some 250-2C fibre clutch plate thickness please. These might be the same as 125H (3.0mm).
Thanks
Mark

Re: Fibre Clutch plate thickness

Posted: 17 Mar 2022 15:16
by buzby
Only four years after you first asked this Mark, :) I can say mine are 2.7mm thick so some wear on mine I expect.

Can I ask if you do the clutch spring nuts up fully or back them off a few turns ?

thanks,

Dave.

Re: Fibre Clutch plate thickness

Posted: 17 Mar 2022 21:30
by Steve Brown
Do them up fully, but no need to torque them up too hard. Just nipped into place is fine.

Re: Fibre Clutch plate thickness

Posted: 18 Mar 2022 07:36
by buzby
Thanks Steve.