Angel eyes.

[ogr1]

Well not the real McCoy, but close enough.
They are very bright, but not eye blindingly so.
Wired up via the front auxiliary light with built in resistors. If I remember correctly they are 90mm diameter & sit just inside the headlight shroud & then clear siliconed into place. You have to take both headlight covers off for a secure fit. If they go south.? Then the silicone will easily peel off & no permanent damage caused to the covers, unlike hot glue.
Not to everyone's taste, but I've noticed that the cage drivers are very aware of my presence on the road.

[Tinker]

Cool I haven’t got a front dry or parking light so I might do this. Where did you get them from?

[ogr1]

Hi.
Purchased mine from AliExpress, but fleabay & Wish
sell them too. Now come in different colours. Amber would look even better imo.
Example...

[Tinker]

If they did a white with switchable amber that would be cool
Are they 90mm outside diameter? Also you driving lamp look quite nice where are they from? Thanks

[ogr1]

My mistake they are 80mm outer diameter.
Auxiliary lights from..
https://www.bikevis.com/product/bikevis ... ry-lights/
Bracket off fleabay, initially for a cruiser type bike.
Flip it 180° to fit, no huge mods needed other than
I had to bend the tangs & fit smaller clamps to those, otherwise the lights would be pointing downwards.
In hindsight I could have cut the tangs off and bought these smaller clamps.