Rear Sprocket from JT

Anything to do with motorcyles
Post Reply
Johnmcnally
Posts: 6
Joined: 14 Oct 2017 14:54
Location: London

Rear Sprocket from JT

Post by Johnmcnally »

I can confirm that a reasonable replacement sprocket in for my cast wheel Strada and probably the majority of cast wheel models was sourced from JT Sprockets : JTR1022.38 around £22 It's in 530 - I had wanted to convert to 520 but I already had a 530 chain and getting hold of this size sprockets was proving too much of a problem.

Thanks to Mike Smyth for the tip.

John McNally
morini_tom
Posts: 919
Joined: 05 May 2006 13:47
Location: Northampton

Re: Rear Sprocket from JT

Post by morini_tom »

Just to complete the loop on this one, following advice from Tom Ros in the ‘wanted forum’ I bought a sprocket from an MuZ660 which is a 39 tooth and in a 520 size. Readily available for about £20.

JTR18-39 is the code.

Not fitted it yet but it looks spot on.

Now everybody has easily available options for both 530 and 520 sprockets
Post Reply