Search found 171 matches
- 12 Dec 2021 00:10
- Forum: Bikes and bits wanted
- Topic: 250 brake lever and master cylinder
- Replies: 5
- Views: 2577
250 brake lever and master cylinder
Trying to improve braking on my 77 350 Strada and have heard that these will do it so if anyone has a spare?
- 16 Aug 2021 07:34
- Forum: Tre e mezzo
- Topic: Electrical issues
- Replies: 9
- Views: 4587
Re: Electrical issues
Found the issue in poor earth so switch not earthing! So all good there. In terms of connections to regulator the wiring is as per Blue service manual - see pic - so brown from fuse box to regulator as required I think. And red from battery to fuse box. Cheers
- 04 Aug 2021 16:20
- Forum: Tre e mezzo
- Topic: Electrical issues
- Replies: 9
- Views: 4587
Electrical issues
Two problems possibly connected:
1) with the key in second (ie lights on (5 pole switch - 1977 Strada)) position the bike stopped charging.
2) having checked wires to switch and fuse block bike then wouldn’t turn off ie runs even with key out.
Any thoughts out there?
Cheers
1) with the key in second (ie lights on (5 pole switch - 1977 Strada)) position the bike stopped charging.
2) having checked wires to switch and fuse block bike then wouldn’t turn off ie runs even with key out.
Any thoughts out there?
Cheers
- 11 Jul 2021 16:14
- Forum: Tre e mezzo
- Topic: Top end cutting out
- Replies: 9
- Views: 4728
Re: Top end cutting out
Finally got to the bottom of it. The block where the main jet/float bowl retaining nut screws in had split vertically. Not much but was allowing excess fuel round the main jet, hence rich running to end. Replacement carb body ( Ducatipaddy - nice refurb) and all good.
- 06 Jul 2021 20:32
- Forum: Tre e mezzo
- Topic: Little brass tube in carb throat
- Replies: 9
- Views: 3927
Re: Little brass tube in carb throat
Cheers, address on the way.
- 04 Jul 2021 21:26
- Forum: Tre e mezzo
- Topic: Little brass tube in carb throat
- Replies: 9
- Views: 3927
Re: Little brass tube in carb throat
Both holes clear. Just interested in the purpose of the tube and if some carbs had it while others didn’t?
- 04 Jul 2021 10:41
- Forum: Tre e mezzo
- Topic: Little brass tube in carb throat
- Replies: 9
- Views: 3927
Re: Little brass tube in carb throat
Understood on the air feed to the atomiser. The existing body (being changed as the jet block split) has the pipe. The replacement has the passage but no tube (see pic). Just wondering if the lack of tube matters?
- 03 Jul 2021 19:05
- Forum: Tre e mezzo
- Topic: Little brass tube in carb throat
- Replies: 9
- Views: 3927
Re: Little brass tube in carb throat
See pic attached VHB25BS carb.
- 01 Jul 2021 22:29
- Forum: Tre e mezzo
- Topic: Little brass tube in carb throat
- Replies: 9
- Views: 3927
Little brass tube in carb throat
Anyone know what the little brass tube slanting outwards in the bottom of the throat of the VHB carb? I have bought a new body and am fitting all the jets etc from the old one but finding this bit hard to remove. Just wondering how, and indeed what it is.
Cheers
Cheers
- 23 May 2021 19:47
- Forum: Tre e mezzo
- Topic: Top end cutting out
- Replies: 9
- Views: 4728
Re: Top end cutting out
Having checked carbs thoroughly tried a plug change to BP7EV from B7ES and problem seems solved. I guess the more slender electrode works better.
- 16 May 2021 17:20
- Forum: Tre e mezzo
- Topic: Top end cutting out
- Replies: 9
- Views: 4728
Re: Top end cutting out
Hi, this is with two new taps fitted and both open. Dropping down gears makes no difference. I will check the ignition bits though.
- 16 May 2021 13:58
- Forum: Tre e mezzo
- Topic: Top end cutting out
- Replies: 9
- Views: 4728
Top end cutting out
My Strada faltering and power dying away when ridden hard, esp going up hills. Ok if back off and then give it another go but then same thing happens. Thought it may be fuel supply as there was a bit of crud in the float chambers so cleaned tank and fitted new taps. Carbs balanced and new gasket kit...
- 03 May 2021 17:51
- Forum: Bikes and bits wanted
- Topic: Sugar cube fuel tap for 3.5
- Replies: 8
- Views: 4641
Re: Sugar cube fuel tap for 3.5
Thanks for the tip but had a quick check and sure enough none there.
- 06 Apr 2021 20:18
- Forum: Bikes and bits wanted
- Topic: Sugar cube fuel tap for 3.5
- Replies: 8
- Views: 4641
Sugar cube fuel tap for 3.5
If anyone has a spare one.Cheers
- 10 Oct 2020 16:19
- Forum: Bikes and bits wanted
- Topic: CEV Indicators
- Replies: 0
- Views: 1727
CEV Indicators
If anyone has any original chrome indicators for a 77 Strada