Search found 752 matches
- 04 May 2023 21:00
- Forum: Tre e mezzo
- Topic: Hard to start
- Replies: 11
- Views: 2330
Re: Hard to start
You should put that woodroof key, before doing anything else, because if the flywheel is not in the corect posicion you can not use the marks of PMS and ANT and will loose the valve and ignition timing.
- 04 May 2023 10:00
- Forum: Projects
- Topic: I need your help
- Replies: 9
- Views: 6052
Re: I need your help
To me that sounds a lot like air leaks concerning the rubber manifold head-carburator. Test it like Tom says with breake cleaner spray or something like this. When it is running at high revs at idle try to press the carbs towards the head or just moving their position a bit. When revs are changing, ...
- 02 May 2023 20:40
- Forum: Bikes and bits for sale
- Topic: STAINLESS STEEL CENTRE STAND BOLT
- Replies: 3
- Views: 4147
Re: STAINLESS STEEL CENTRE STAND BOLT
My experience with the center stand bolt is, that the main problem used to be a corroded tube that should be free (and lubricated) inside the tube of the frame. The stand should not turn on the bolt itself that is fixed in the left part of the stand (and the frame?), but often it does because these ...
- 02 May 2023 20:25
- Forum: Tre e mezzo
- Topic: Hard to start
- Replies: 11
- Views: 2330
Re: Hard to start
Take the spark plugs out, conect a Multimeter to the green cable coming from the alterator (AC voltage to ground). Sit on the bike holding it firmly on the center stand, 2nd or 3rd gear. Now a friend that have have had a good breakfast schould turn the wheel in direction of running. You should measu...
- 01 May 2023 16:49
- Forum: Bikes and bits for sale
- Topic: Rear Shock Absorber 350 / 500
- Replies: 10
- Views: 4044
Re: Rear Shock Absorber 350 / 500
In a 350 frame the back will rise and change a bit the geometria of the chasis.
I´ve mounted some 315 mm Konis instead of 300 Marzocchis and for me it´s ok with clipons and self-made rearsets.
I´ve mounted some 315 mm Konis instead of 300 Marzocchis and for me it´s ok with clipons and self-made rearsets.
- 30 Apr 2023 12:12
- Forum: Bikes and bits wanted
- Topic: 1981 Strada right hand disc and caliper
- Replies: 3
- Views: 3313
Re: 1981 Srada right hand disc and caliper
You can convert a left hand caliper to a right hand one just changing the posicion of the bolts
- 28 Apr 2023 15:55
- Forum: Tre e mezzo
- Topic: Tarozzi rearsets
- Replies: 10
- Views: 2134
Re: Tarozzi rearsets
This is one of these plates that is mounted with twoo srews (a little one on the axle of the swing arm)?
If so, try Dieter Hoffmann in Germany morinicorse1@aol.com
I don´t know if he has the parts apart, but some years ago he sold complete Tarozzi rearsets
If so, try Dieter Hoffmann in Germany morinicorse1@aol.com
I don´t know if he has the parts apart, but some years ago he sold complete Tarozzi rearsets
- 26 Apr 2023 20:18
- Forum: Bikes and bits for sale
- Topic: Rear Shock Absorber 350 / 500
- Replies: 10
- Views: 4044
Re: Rear Shock Absorber 350 / 500
The length of the 350 (300mm) is not the same as for the 500 You took it off a 350 or from a 500?
- 26 Apr 2023 20:16
- Forum: The 500
- Topic: carburation issues.
- Replies: 13
- Views: 5490
Re: carburation issues.
And have a look at the little mixture screws. Especially the fron one may have lost the peak. There schould be the srew with its peak, the spring, a little washer and at least a small O-ring. the washer is to protect the O-ring towards the spring.
- 23 Apr 2023 10:57
- Forum: The 500
- Topic: Measured brake force
- Replies: 5
- Views: 3847
Re: Measured brake force
Going down with the bore of the master cilinder changes everything! I´ve put a 13mm Grimeca pump (two discs) and it´s a two finger brake. I think 14 mm would be the way to go with two discs, 13 mm will do perfectly with one disc.
- 20 Apr 2023 16:02
- Forum: Tre e mezzo
- Topic: Starting from cold
- Replies: 13
- Views: 2952
Re: Starting from cold
I need both chokes on for a cold start but I have to be ready to flip one choke off straight away or it will rev at 5,000rpm. On one choke it's revving at 2,000rpm. Engine needs choke on for about 3 miles to stop it stalling at junctions. One of my 501 needs the same procedure, both choke, one kick...
Re: Tyres
I´m actualy delighted with Conti Road Attak (front) and Conti Classic Attak (rear). These are radial tyres! As long as they were available I used Avon Roadrunner. When they disapeared Avon Roadrider (the Roadrunners were better for me), then I tried BT45 (best tyre till then, but much less km then t...
- 10 Apr 2023 20:52
- Forum: Tre e mezzo
- Topic: Help! Spring behind flywheel M22.01.37
- Replies: 3
- Views: 1386
Re: Help! Spring behind flywheel M22.01.37
Probably I have one of theses springs (I´m quite sure)
The problem is that the spring is in Germany and I´m in Spain til the end of may
So if you can´t find one ´, remind me. The easiest way would be if a Morinisti of GB comes to the german meeting and could take it with him
The problem is that the spring is in Germany and I´m in Spain til the end of may
So if you can´t find one ´, remind me. The easiest way would be if a Morinisti of GB comes to the german meeting and could take it with him
- 28 Mar 2023 22:45
- Forum: Bikes and bits for sale
- Topic: 500 sport for sale?
- Replies: 7
- Views: 4100
Re: 500 sport for sale?
:lol: The worst thing of the Morinis (nearly the only thing) to me is the position of the footrest. This position spoiles that buityful and excelent bikes. Everythings changes tremendously mounting set back footrests! Even with Strada handlebars, and with clipons it is obligatorio if you don´t like ...
- 28 Mar 2023 06:44
- Forum: The 500
- Topic: Primarily gear sprocket
- Replies: 13
- Views: 5322
Re: Primarily gear sprocket
Try the Liebrabdt brothers, they are the successores of Wolfgang Tritsch
https://www.tremezzo.de/impressum.html
https://www.tremezzo.de/impressum.html