Could be gilardoni cylinders?
Generator rotor not from an electric start model unless someone has removed the ring.
Search found 2401 matches
- 06 Dec 2023 20:52
- Forum: Projects
- Topic: Anyone recognise this?? New to Morini.
- Replies: 26
- Views: 16257
- 06 Dec 2023 19:05
- Forum: Projects
- Topic: Anyone recognise this?? New to Morini.
- Replies: 26
- Views: 16257
- 03 Dec 2023 15:32
- Forum: The 500
- Topic: left hand gearchange conversions
- Replies: 10
- Views: 6564
Re: left hand gearchange conversions
I was also taught that. Compress the forks then apply the front hard. The rear will become unweighted and will lock.
- 28 Nov 2023 18:08
- Forum: Tre e mezzo
- Topic: Convert choke to bar mount lever
- Replies: 15
- Views: 5291
Re: Convert choke to bar mount lever
The 500 used a splitter to operate both carbs.
- 25 Nov 2023 10:40
- Forum: Seiemmezzo
- Topic: Eicma
- Replies: 27
- Views: 15771
Re: Eicma
So serious troubles, did you report this to the factory or importer? Poor sod, burning himself, you can be too nice too apparently ;) Did you tell the german chap it's actually Chinese? ;) Yes I did, but the problem is that the importer had changed to Moto Mondo, who failed to contact me, but would...
- 25 Nov 2023 10:28
- Forum: Seiemmezzo
- Topic: Eicma
- Replies: 27
- Views: 15771
Re: Eicma
More photos... including my attempt at a tail tidy. A great bike spoiled by a design fault and a tank that needed to be 17 or 18 litres. When the fuel ran low, if you braked or went down hill the bike would cut out as the fuel pickup for the pump was at the rear of the tank. The most I got out of a...
- 25 Nov 2023 10:12
- Forum: Seiemmezzo
- Topic: Eicma
- Replies: 27
- Views: 15771
Re: Eicma
I was overtaking a line of cars on the two lane A19 betwixt York and Thirsk and as I accelerated I felt a very high frequency vibration. I stopped further up the road to fill up and a guy came over and said my number plate was missing. Surprised, I looked and the whole thing had fractured down by th...
- 24 Nov 2023 07:22
- Forum: Tre e mezzo
- Topic: Starter motor chain snapped
- Replies: 17
- Views: 6525
Re: Starter motor chain snapped
I always leave slack in the chain, it is easy to havebit too tight. As John says, a tooth may have broken taking the chain with it, but looking at the chain, it appears the roller has pulled out through the end of the plates. It may have seized. I'll have a good look at mine next time the case is of...
- 23 Nov 2023 21:11
- Forum: Tre e mezzo
- Topic: Starter motor chain snapped
- Replies: 17
- Views: 6525
Re: Starter motor chain snapped
One question, do you know why the chain snapped?
- 22 Nov 2023 07:15
- Forum: Tre e mezzo
- Topic: Clutch centre difference
- Replies: 5
- Views: 3939
Re: Clutch centre difference
Yes, I worked it out in bed last night. Instead of dreaming of Kylie Minogue, I dream of Morini clutch centres!
Good to have it confirmed.
Good to have it confirmed.
- 21 Nov 2023 21:19
- Forum: Tre e mezzo
- Topic: Clutch centre difference
- Replies: 5
- Views: 3939
Re: Clutch centre difference
Oops, just seen your other post.MickeyMoto wrote: ↑21 Nov 2023 21:13 Are you sure?
I thought the difference was the input shaft on the 500 is beefier and the sleeve is different, but the hub is the same.
Referee!
How would the plates be the same if the centre hubs were different?
- 21 Nov 2023 21:13
- Forum: Tre e mezzo
- Topic: Clutch centre difference
- Replies: 5
- Views: 3939
Re: Clutch centre difference
Are you sure?
I thought the difference was the input shaft on the 500 is beefier and the sleeve is different, but the hub is the same.
Referee!
I thought the difference was the input shaft on the 500 is beefier and the sleeve is different, but the hub is the same.
Referee!
- 18 Nov 2023 11:42
- Forum: Seiemmezzo
- Topic: Eicma
- Replies: 27
- Views: 15771
Re: Eicma
Yes
- 18 Nov 2023 10:09
- Forum: Seiemmezzo
- Topic: Eicma
- Replies: 27
- Views: 15771
- 13 Nov 2023 19:51
- Forum: Tre e mezzo
- Topic: Rear Brake Shoes
- Replies: 27
- Views: 7254
Re: Rear Brake Shoes
Probably the cost of a new pair of shoes. As nobody appears to know what fits, then hopefully it will be peace of mind.