I have a 78. Sport with 2 yellow, 1 green and 1white. Alternator. I’m trying to work out wich regulator is correct for this alternator. I have a red one and a black one.
I’m not getting any power to the battery. What regulators fit what bikes?
Search found 19 matches
- 16 May 2022 18:20
- Forum: Tre e mezzo
- Topic: Regulator/ Rectifier question
- Replies: 2
- Views: 1812
- 04 May 2022 20:10
- Forum: Tre e mezzo
- Topic: Flat slides rotation
- Replies: 1
- Views: 1130
Flat slides rotation
Silly question maybe but what’s the correct orientation for the square carburettor slides. Low side to filter or long side?
VHBZ 25
VHBZ 25
- 28 Mar 2022 16:54
- Forum: Tre e mezzo
- Topic: Dished clutch plate missing
- Replies: 4
- Views: 1809
Re: Dished clutch plate missing
Thanks for all the input. I’m thinking I’ve made a mistake with the placement of the spacer. But I’ll be having it apart soon. I’ll follow up on the result.
- 28 Mar 2022 07:15
- Forum: Tre e mezzo
- Topic: Dished clutch plate missing
- Replies: 4
- Views: 1809
Dished clutch plate missing
I don’t have the dished plate in my clutch. Does anyone also run without one? What could be the possible faults resulting? I’m suffering heavy gear change problems. Almost have to use force sometimes to get a gear and impossible neutral selection. It’s a ‘78 3 1/2 with a nylon clutch inner ring and ...
- 24 Feb 2022 12:45
- Forum: Tre e mezzo
- Topic: Mark3 pick-up and NLM cdi/coil set up
- Replies: 1
- Views: 1215
Mark3 pick-up and NLM cdi/coil set up
Dear Oracle. I have recently acquired a new black mark 3 pick up and magnet from Italy. I have also a new NLM cdi. I have learnt I must introduce a diode in the red wire if it had original transducers but is this true also with the NLM unit.
Any other tips welcome.
Any other tips welcome.
- 20 Feb 2022 11:02
- Forum: Tre e mezzo
- Topic: Resistor caps and NLM CDI and coils.
- Replies: 4
- Views: 2077
Re: Resistor caps and NLM CDI and coils.
What iridium plugs actually? Is that a resistor plug and resistor cap together?
- 19 Feb 2022 12:22
- Forum: Tre e mezzo
- Topic: Resistor caps and NLM CDI and coils.
- Replies: 4
- Views: 2077
Resistor caps and NLM CDI and coils.
After a long time I’m now looking at my 350 sport with NLM cdi and coils. What resistor caps and plugs are recommended on a standard engine. All input gladly appreciated.
- 17 Feb 2022 19:10
- Forum: Tre e mezzo
- Topic: Pick up rotor stuck
- Replies: 3
- Views: 1729
Re: Pick up rotor stuck
They Allen Key Jiggle did the job. Nice one
- 16 Feb 2022 19:38
- Forum: Tre e mezzo
- Topic: Pick up rotor stuck
- Replies: 3
- Views: 1729
Pick up rotor stuck
Hi guys. My rotor is pick up rotor is stuck. Any tips or tricks to free it?
- 16 Oct 2019 14:38
- Forum: Tre e mezzo
- Topic: Clutch pushrod continues
- Replies: 1
- Views: 2002
Clutch pushrod continues
Hi Guys. Having successfully solved my previous problem I notice I have a groove just below the head of the clutch pushrod at the basket end. Just where it goes through the seal. The bike has stood still sometime and I’m wondering if this is wear or as intended.
Thanks Mike
Thanks Mike
- 02 Oct 2019 13:09
- Forum: Tre e mezzo
- Topic: Clutch push rod problems
- Replies: 2
- Views: 2250
Re: Clutch push rod problems
After stripping the clutch and watching several Paul Compton you tube videos i found the problem to be quite a simple one of course. As i said the clutch actuating arm was making contact with the chain when pulled in so i assumed a clutch problem but found that i had assembled the drive sprocket aro...
- 01 Oct 2019 17:12
- Forum: Tre e mezzo
- Topic: Clutch push rod problems
- Replies: 2
- Views: 2250
Clutch push rod problems
After a total engine Rebuild on my 78 sport I have a problem with my clutch. My pushrods don’t seem to be long enough! I have the four rods and the last small rod only sticks out 6 mm so when I pull the lever the arm makes contact with the chain. All parts are new from NLM. I’ve heard some engines h...
- 14 May 2018 15:44
- Forum: Tre e mezzo
- Topic: Tarozzi Rear Sets
- Replies: 6
- Views: 5857
Re: Tarozzi Rear Sets
I recently posted a similar question on the kickstart / break pedal issue. dont be tempted to kick it over to see how it works. i broke the Tarozzi brake arm 1st kick! as said cut a stump off the end of the brake pedal or buy a small folding rear footrest and make that work. The arm on its own cost ...
- 26 Mar 2018 18:42
- Forum: Tre e mezzo
- Topic: Tarozzi rearset problem
- Replies: 8
- Views: 7606
Tarozzi rearset problem
So i have tha same problem most others have. When kicking over the starter the pedal makes contact with the gearshift pedal. I have the full tarozzi set with the extended kick start pawl. what is possible to make the kickstart not hit the rear brake pedal. pictures off other bike preferred . thanks ...
- 27 Mar 2015 21:30
- Forum: Tre e mezzo
- Topic: Headlight wiring
- Replies: 4
- Views: 6767
Headlight wiring
Hi guys, I've spent 3 days trying to get the headlight to work. Wired up as blue book for 6 pole switch but can only get a side light. That goes out when switched to main beam. Is the handlebar switch connected to earth?
Anyone got a diagram of switchgear to headlight?
Cheers
Mike
Anyone got a diagram of switchgear to headlight?
Cheers
Mike