MRC Forum- brought to you by www.morini-riders-club.com

yes when do come back Robin, let me know.
regards
dougie

mike a have no plans soon :( because i am a member of a local motocycle club and i co-ordinating between my local motocycle club and the stephenson railway museum in north shields who are having a day event inc motorcycles, vintage buses,steam locomotives on the 19th july, my morini will be on displ...

thanks, i have just checked all the earth connections with a multi meter and i think they are ok ! but i may looking for perfection from a 30 year old bike

thanks alan i have also had 30+ bikes over the years.this morini is the best handeling bike i have had :) but the electrics are doing my head in :!: it starts first kick every time :D its funny my wife wendy and i rode to carter bar in the scottish english borders (near jedburgh) to meet other morin...

Hi, i think i have a problem with my voltage regulator, i have just replaced the battery with a new battery and indercator relay on my 1978 3-1/2 sport because the deriction indercators were flashing to slow (one flash per two seconds) when the engine was not running and flashing to fast ( three fla...

Hi all. on sunday the 21st june at 12 noon i am arranging a meet in the southbound laybuy on the A68 england-scottish borders,south of jedburgh, for morini riders or anyone interested in morini motorcycles, then a short ride out to be decided on the day by all rides ! at the moment there should be m...

thanks mate

can anyone tell me if a fit a kill switch mounted on one of the handlebars on my 1978 3-1/2 sport were would i wire it to

i have 1978 3-1/2 sport with cast wheels the wheels are marked 12/76 i think that means they were cast in DEC 1976 the wheels are fitted with tubed tyres and inner tubes. when i replace the tyres can i fit tubeless tyres without innertubes

theaded rod 10mm that sounds easy

thanks for the input, is there an easy/cheap way of removing the old bushes big hammer bench vice

yesterday i removed the wingarm of the bike to check the swingarm bushes and swingarm spindle for play. i have new bushes to fit the swingarm, but, the play of the new bushes and the bushes in the swingarm are the same amount play is normal before fitting new bushes

i found this one but its in US dollars which makes it expensive to ship to the uk.
we need M22 x 1.5mm thread pitch
order Number--- 1016 SM---

http://www.magneticdrainplugs.com/metric.htm

today i changed the engine oil and my 3-1/2 the sump plug size is 22mm dia X1.5 mm thread pitch and 18 mm spanner size !!