Search found 889 matches
- 28 Mar 2024 14:18
- Forum: Tre e mezzo
- Topic: Lighting circuit problem
- Replies: 7
- Views: 354
Re: Lighting circuit problem
Checked through the wiring as amp flow from generator was nowhere near what it should have been after the regulator. Cleaned up the terminals and the fuse holders etc and …. back to 14.5 volts across the battery terminals at 5000 revs. So seems it may just have been dirty spade connectors. Glad you...
- 23 Mar 2024 15:12
- Forum: Gran Passo
- Topic: Wiring diagram
- Replies: 5
- Views: 146
Re: Wiring diagram
Glad to gear it.
And for future reference, I've now added a Granpasso wiring diagram to the members area too
And for future reference, I've now added a Granpasso wiring diagram to the members area too
- 22 Mar 2024 20:47
- Forum: Gran Passo
- Topic: Wiring diagram
- Replies: 5
- Views: 146
Re: Wiring diagram
Ah maybe not then, it’s been a while since I’ve looked at that manual.
There is definitely a Corsaro wiring diagram in the members area technical section though.
Try here:
https://www.morini-riders-club.com/memb ... 00Wire.pdf
(You’ll need you club members area login)
There is definitely a Corsaro wiring diagram in the members area technical section though.
Try here:
https://www.morini-riders-club.com/memb ... 00Wire.pdf
(You’ll need you club members area login)
- 22 Mar 2024 09:04
- Forum: Gran Passo
- Topic: Wiring diagram
- Replies: 5
- Views: 146
Re: Wiring diagram
I don’t know of one for a granpasso, that’s not to say there isn’t.
There is a wiring diagram for the Corsaro though in the Corsaro workshop manual, which is available to download from the members area. Depending on your needs this may help get you looking in the right direction
There is a wiring diagram for the Corsaro though in the Corsaro workshop manual, which is available to download from the members area. Depending on your needs this may help get you looking in the right direction
- 17 Mar 2024 22:03
- Forum: Tre e mezzo
- Topic: Fuel tap overhaul
- Replies: 10
- Views: 1381
Re: Fuel tap overhaul
Just by way of update on this, the club has now received the first samples from our new tooling for electric tap diaphragms and they look excellent.
We are undergoing a period of testing now and then will be producing a full batch so watch this space and ATG for updates soon.
We are undergoing a period of testing now and then will be producing a full batch so watch this space and ATG for updates soon.
- 10 Mar 2024 16:39
- Forum: The Darts
- Topic: New dart new problems (tank and fairings)
- Replies: 2
- Views: 341
Re: New dart new problems (tank and fairings)
Here are some pics of the panels as they are delivered- no paint.
- 10 Mar 2024 10:46
- Forum: The Darts
- Topic: New dart new problems (tank and fairings)
- Replies: 2
- Views: 341
Re: New dart new problems (tank and fairings)
Ahh the two Achilles heels of the Dart… Tank: I think it’s fair to say that no permanent repair solution has been found so far. The normal reason for leaks is splits around the mounded in bosses for the fuel tap or airbox bolts, or people using too long a bolt or doing them up too tight. I have also...
- 05 Mar 2024 19:47
- Forum: Factory customs
- Topic: Stator Question
- Replies: 15
- Views: 912
Re: Stator Question
This is a kokusan one
- 05 Mar 2024 19:36
- Forum: Factory customs
- Topic: Stator Question
- Replies: 15
- Views: 912
Re: Stator Question
Won’t be a kokusan one with a green wire. The kokusan ignition doesn’t use a self generating ignition winding like the ducati electronica ones.
Kokusan stator has 3 yellow wires only and many very neatly wound coils
Kokusan stator has 3 yellow wires only and many very neatly wound coils
- 02 Mar 2024 11:52
- Forum: Tre e mezzo
- Topic: Best 31/2 cam for all-round flexibility?
- Replies: 19
- Views: 1474
Re: Best 31/2 cam for all-round flexibility?
Sport cam was used from the first sports up until the later K series bikes where they moved to the M cam. There should be an S Stamped in the cam between the middle lobes, not so helpful if the engine is together, but easy to check what cam you have by measuring with a timing disc. None of the Morin...
- 01 Mar 2024 08:18
- Forum: Tre e mezzo
- Topic: Reinstating the electric starter part 2
- Replies: 9
- Views: 478
Re: Reinstating the electric starter part 2
Can you post some pictures of what you have? As above, I don’t believe there were any differences in the electric start case for the road models. I’ve not got a decent picture of my k1 before I fitted rearsets but below is a picture from the sales brochure of the standard setup, and one of my bike n...
- 29 Feb 2024 09:36
- Forum: Bikes and bits wanted
- Topic: 250 2c carb body
- Replies: 7
- Views: 348
Re: 250 2c carb body
If you run out of options, there is what looks to be quite a clean used pair on eBay in Italy:
https://www.ebay.co.uk/itm/126272639700
I’ve bought from this seller before, no problems.
https://www.ebay.co.uk/itm/126272639700
I’ve bought from this seller before, no problems.
- 28 Feb 2024 19:01
- Forum: 250 Vee
- Topic: 250 rebuild from bits
- Replies: 27
- Views: 7115
Re: 250 rebuild from bits
I’ve no experience of the 250 but certainly with the 350 It’ll start with/without an airbox even if it doesn’t run great without. A spray of coldstart down the carb mouth is a good way to rule out carb or ignition issues. If you’re not even getting a pop then: Are you absolutely certain that the pic...
- 27 Feb 2024 08:15
- Forum: Announcements
- Topic: ATG 388
- Replies: 0
- Views: 177
ATG 388
ATG 388 is now available in the members area.
Don't forget, trackday registrations close in the next week or so, so this is your alst call to register.
Also, places for the rally weekend continue to sell, so get your booking in soon
Don't forget, trackday registrations close in the next week or so, so this is your alst call to register.
Also, places for the rally weekend continue to sell, so get your booking in soon
- 22 Feb 2024 19:38
- Forum: Morini Events
- Topic: Bristol classic show- Shepton Mallet 24-25 Feb
- Replies: 0
- Views: 259
Bristol classic show- Shepton Mallet 24-25 Feb
The club will have a stand at the Bristol classic bike show in Shepton mallet this weekend 24-25th Feb.
Stand M30 in the showering Pavillion. Come and say hi!
Stand M30 in the showering Pavillion. Come and say hi!