Search found 1251 matches
- 12 May 2024 18:37
- Forum: Tre e mezzo
- Topic: Strada MK5 Front Spindle washer
- Replies: 8
- Views: 129
Re: Strada MK5 Front Spindle washer
Thanks for reminding me.I’ll go back to sleep…..
- 12 May 2024 14:58
- Forum: Tre e mezzo
- Topic: Strada MK5 Front Spindle washer
- Replies: 8
- Views: 129
Re: Strada MK5 Front Spindle washer
This is interesting. I thought why not remove my twin disc front cast wheel and check. It has not been off for a good while. What do I find? No washer either. Spindle goes through rh fork into speedo drive then through shouldered spacer on other side of wheel before exiting the lh fork. There is a g...
- 08 May 2024 10:36
- Forum: Tre e mezzo
- Topic: Spark plugs
- Replies: 21
- Views: 20398
Re: Spark plugs
I spoke with NGK at the NEC show last Nov about fake plugs. The rep said the company actively tried to suppress ( oops!)
fake plugs but it is a never ending mission.
fake plugs but it is a never ending mission.
- 06 May 2024 05:55
- Forum: Tre e mezzo
- Topic: 350 not charging the battery
- Replies: 4
- Views: 198
Re: 350 not charging the battery
Have you a copy of the Blue book Morini manual? According to the section on testing for correct charge function, you should be getting around 8amp with the meter connected in series to the red lead which goes from the generator to the battery at 6000rpm. Disconnect the three leads, 2 yellow and one ...
- 26 Apr 2024 14:49
- Forum: Tre e mezzo
- Topic: new to morini
- Replies: 18
- Views: 833
Re: new to morini
I have a slightly later 350, a K1 and that has the oil light, indicator light ( mine have worked faultlessly), lights on and high beam lights. The oil light comes on very rarely when running indicating that the sender has some muck in or needs replacing. I got a few in case from ebay and of course i...
- 15 Apr 2024 14:47
- Forum: Factory customs
- Topic: Excalibur jetting
- Replies: 5
- Views: 1530
Re: Excalibur jetting
I marked the twistgrip with a series of different colour paint lines to help me, 1/8 ,1/4,1/2 . Above about half I was not concerned about as it was up to half that affecting my steady throttle response. Both on the 350 and the 507 I have experimented with the idle jets sizes from 50 through to 43. ...
- 14 Apr 2024 19:19
- Forum: Factory customs
- Topic: Excalibur jetting
- Replies: 5
- Views: 1530
Re: Excalibur jetting
Go back to the front page of this website and about halfway down is a link to the Morini club.nl pages. In Technical/carburettors is a table of settings. This might be of help. My experience with the air box housing is the opposite of the oft suggested benefit of removing the flowerpot etc.Also with...
- 18 Mar 2024 19:55
- Forum: The 500
- Topic: Rear Master Cylinder
- Replies: 10
- Views: 1123
Re: Rear Master Cylinder
That is really good news and I am sure others will be interested in this.
- 17 Mar 2024 20:04
- Forum: Off road bikes
- Topic: Oil Capacity 501 Camel
- Replies: 1
- Views: 1977
Re: Oil Capacity 501 Camel
I use 2.5L in both my 350 and my 507.
- 13 Mar 2024 18:16
- Forum: The 500
- Topic: Rear Master Cylinder
- Replies: 10
- Views: 1123
Re: Rear Master Cylinder
If you go with the Gemini Karts option do let us know how you get on. It looks promising.
- 12 Mar 2024 18:39
- Forum: The 500
- Topic: Rear Master Cylinder
- Replies: 10
- Views: 1123
Re: Rear Master Cylinder
From some recent correspondence I had it may be that Brembo PS16 master cylinder can be used however the actuating arm needs modifying or a new arm made to fit. I rebuilt mine in 2008 and I think it will not be long before I need to do something again. This link may help https://www.morini-riders-cl...
- 07 Mar 2024 17:53
- Forum: The 500
- Topic: Electric starter woe
- Replies: 2
- Views: 890
Re: Electric starter woe
That is a good result and far better than having to push a Trident with a thrown rod from the Stratton bypass to Broome Manor Lane.
I have had the starter relay weld on once. A deft kick stopped that.
I have had the starter relay weld on once. A deft kick stopped that.
- 05 Mar 2024 08:58
- Forum: Bikes and bits wanted
- Topic: atomiser/emulsion tube.
- Replies: 9
- Views: 1286
Re: atomiser/emulsion tube.
You can get an available spec 260 then drill out 0.8 mm holes, then ream with a 2.60 reamer to make a U pattern.
- 02 Mar 2024 08:19
- Forum: Tre e mezzo
- Topic: Reinstating the electric starter part 2
- Replies: 9
- Views: 1239
Re: Reinstating the electric starter part 2
Try checking the “bits for sale” section at the moment, might be a case in amongst the parts ex Barcelona? It was worth me looking at my gear linkage yesterday. The lever action was stiff. This turned out to be as a result of me trying to take up wear in the pivot bush/ frame using some thin shim me...
- 01 Mar 2024 13:55
- Forum: Tre e mezzo
- Topic: Reinstating the electric starter part 2
- Replies: 9
- Views: 1239
Re: Reinstating the electric starter part 2
Measuring my rod, from the centres of each rose joint gives 151 mm ( home made rod)