Search found 756 matches
- 23 May 2024 08:14
- Forum: Tre e mezzo
- Topic: Strada carbs
- Replies: 7
- Views: 178
Re: Strada carbs
Do you have the new white floats? If so have a look at them wether there are some ridges that can jam with the body of the carb bowl.
- 21 May 2024 20:06
- Forum: Tre e mezzo
- Topic: Gear shaft oil seal
- Replies: 3
- Views: 99
Re: Gear shaft oil seal
Normaly you can pull it out with 2 wood screws. Mark it first with a fine "Piker" where you want to place the screws. When fitted them, pull with some pliers. That should work (did so the times I tried it)
- 17 May 2024 23:54
- Forum: The 500
- Topic: Stock Air Box questions
- Replies: 5
- Views: 208
Re: Stock Air Box questions
I´m still waiting for an original 500 airbox to face that problem and wonder wether it will be easier or even worse with 28 carbs and 501 barrels. The cilinders are about 5 mm lower but the carbs bigger :roll: I would like to use the original airbox in the 500 Frankenstein. If this is a pain, will m...
- 12 May 2024 23:55
- Forum: Tre e mezzo
- Topic: Strada MK5 Front Spindle washer
- Replies: 8
- Views: 250
Re: Strada MK5 Front Spindle washer
I can confirm whar George said.The washer is not needed with sealed bearings.
- 30 Apr 2024 11:08
- Forum: Off road bikes
- Topic: Oil seal quick help
- Replies: 1
- Views: 257
Re: Oil seal quick help
350 and 500/501 crankshaft right side: 30-40-7 Camshaft right side: 15-24-7 gear changing: 14-22-4 (or 5) sprocket: 20-30-7 Have a look behind the alternator wether the three allen screws that hold the bearing carrier for the right hand crankshaft are loose. If so, this will be considerable oil-leak...
- 24 Apr 2024 22:38
- Forum: Tre e mezzo
- Topic: new to morini
- Replies: 18
- Views: 994
Re: new to morini
All these things depend on the year of production and if you have in mind to have a 100% original one (quite rare after all these years!). A foto and frame number would help a lot for orientation
- 05 Apr 2024 19:58
- Forum: The 500
- Topic: Kick starting technique
- Replies: 7
- Views: 909
Re: Kick starting technique
If I want to be sure that my 501 starts first kick (or second): the two chokes open, one slow kick without ignition, then looking for compresion, ignition on and a firm kick. Then immediatley one choke off, the second after about 2-500m. Starting a 501 by kicking is nearly impossible without looking...
- 18 Mar 2024 23:15
- Forum: Tre e mezzo
- Topic: Lighting circuit problem
- Replies: 16
- Views: 2690
Re: Lighting circuit problem
Do you have 12 V on the brown cable entering the regulator with ignition on? If not the regulator won´t work.
- 17 Mar 2024 10:19
- Forum: Tre e mezzo
- Topic: Best 31/2 cam for all-round flexibility?
- Replies: 19
- Views: 2878
Re: Best 31/2 cam for all-round flexibility?
Yes, they do.
- 16 Mar 2024 23:56
- Forum: Tre e mezzo
- Topic: Best 31/2 cam for all-round flexibility?
- Replies: 19
- Views: 2878
Re: Best 31/2 cam for all-round flexibility?
The Strada pistons have a distance of 6 mm from the lowest to the highest points of the upper "heron surface" . This distance is 7 mm with the Sport pistons, what makes more compresion. The pistons for the nicasil cilinders also have these 7 mm (perhaps a bit more?) like the sport ones. fr...
- 13 Mar 2024 11:04
- Forum: Factory customs
- Topic: Stator Question
- Replies: 15
- Views: 3179
Re: Stator Question
Green and white wire should be longer because they go to the central electic port. The yellow ones have a shorter way to de regulator. I still can´t find a reason why one of the yellow ones is marked.
- 07 Mar 2024 10:38
- Forum: Factory customs
- Topic: Stator Question
- Replies: 15
- Views: 3179
Re: Stator Question
I don´t see any reason for the 1 ferrule on one of the yellow wires, there should be none.
No idea of the part number.
No idea of the part number.
- 06 Mar 2024 12:07
- Forum: Factory customs
- Topic: Stator Question
- Replies: 15
- Views: 3179
Re: Stator Question
So it will be a "bodyless" stator, with the wire wound directly on the steel-plate-paket. It´s the strongest one with about 200W körperlose Lima.JPG Cannot find a better foto. This one is quite uggly. Only the ignition coil has a plastic body (this one burnt) So probably you also have one ...
- 05 Mar 2024 01:05
- Forum: Factory customs
- Topic: Stator Question
- Replies: 15
- Views: 3179
Re: Stator Question
A late Excalibur stator should be a Kokussan one.
- 02 Mar 2024 16:51
- Forum: Tre e mezzo
- Topic: Best 31/2 cam for all-round flexibility?
- Replies: 19
- Views: 2878
Re: Best 31/2 cam for all-round flexibility?
When one cilinder is off, you can see with a dentists mirror the stamp on the cam . If there is none it´s a strada one.